Pinnacle PCD 20 mill

Pinnacle PCD 20 mill

This topic has 4 replies, 2 voices, and was last updated 21 September 2021 at 21:11 by DiogenesII.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
21 September 2021 at 17:51 #563748
john fletcher 1
Participant
@johnfletcher1
Scarborough Mens (Mates) Shed. We are still on the lookout for an operator manual for this machine, or, as they were marketed under different names by different suppliers in 1970/80 any make will be OK. Also, has some made an attachment to prevent the head from moving around (about) column when lowering or raising the head, I'm sure some has, folk were ingenious those days. There is a kit on ebay for the small diameter column, ours is 115mm in diameter. Perhaps there is some one out there who is the owner or was an owner of one of these machine who would communicate with me, initially via a PM. John
Advert

21 September 2021 at 17:51 #33905
john fletcher 1
Participant
@johnfletcher1
21 September 2021 at 18:27 #563755
DiogenesII
Participant
@diogenesii
Is it the same as the 'Grizzly' badged one in this pdf?

https://cdn0.grizzly.com/manuals/g0705_m.pdf
21 September 2021 at 21:02 #563787
john fletcher 1
Participant
@johnfletcher1
To DiogenesII many thanks from my Mens (Mates) Club friends just what we have been looking for,. we have some novices and i /we want get them on the right foot straight away. John
21 September 2021 at 21:11 #563788
DiogenesII
Participant
@diogenesii
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Is Green Hammerite really so ‘infra dig ‘ ?
  Started by: Michael Gilligan in: The Tea Room
- 6
- 7
- 26 June 2025 at 14:01
  peak4
- Octopus … Is there method in this madness ? 1 2
  Started by: Michael Gilligan in: The Tea Room
- 19
- 34
- 26 June 2025 at 14:00
  not done it yet
- TurboCAD Snaps and Dimensioning? 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 8
- 26
- 26 June 2025 at 13:56
  Nigel Graham 2
- Pulley taper – Herbert B drill
  Started by: gerry madden in: Manual machine tools
- 6
- 14
- 26 June 2025 at 13:51
  Michael Gilligan
- Vee micrometer
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 9
- 19
- 26 June 2025 at 13:32
  peak4
- Amadeal AMABL210E Review – Any Requests?
  Started by: JasonB in: Model Engineer & Workshop
- 12
- 21
- 26 June 2025 at 12:30
  JasonB
- TuffSaws?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 1
- 1
- 26 June 2025 at 11:08
  Bo’sun
- Woodward/Wilding Gearless clock
  Started by: smf in: Clocks and Scientific Instruments
- 2
- 2
- 26 June 2025 at 09:55
  Michael Gilligan
- Mardrive component Misplaced motor component
  Started by: martin baker in: Workshop Tools and Tooling
- 8
- 20
- 26 June 2025 at 09:53
  Colin D
- Readability / clarity in new combined magazine
  Started by: Trevor Gale in: Model Engineer & Workshop
- 16
- 23
- 26 June 2025 at 07:03
  David Senior
- Maisie lubricator
  Started by: ferroequinologist in: Locomotives
- 7
- 10
- 25 June 2025 at 23:14
  Paul Lousick
- Meddings MF4 Manual
  Started by: Richard Kirkman 1 in: Help and Assistance! (Offered or Wanted)
- 6
- 10
- 25 June 2025 at 20:55
  Pete.
- ME beam engine 1 2
  Started by: Jager in: Stationary engines
- 12
- 29
- 25 June 2025 at 20:43
  Malcolm Timmis
- Motorised Adept No. 2 Shaper
  Started by: William Ayerst in: Workshop Tools and Tooling
- 9
- 21
- 25 June 2025 at 20:20
  Michael Gilligan
- What Did You Do Today 2025 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 32
- 165
- 25 June 2025 at 15:07
  duncan webster 1
- A Book Review – slide-rules at the ready
  Started by: Nigel Graham 2 in: The Tea Room
- 3
- 4
- 25 June 2025 at 14:46
  Nigel Graham 2
- Spoilboard Ideas?
  Started by: Steve355 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 22
- 25 June 2025 at 11:31
  John Haine
- Fobco 10 eight drill, NVR problem
  Started by: dareay42 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 5
- 25 June 2025 at 10:40
  dareay42
- Black plastic to replicate Bakelite
  Started by: Craig Brown in: Materials
- 7
- 8
- 25 June 2025 at 08:47
  Robert Atkinson 2
- Hi from another new member
  Started by: bigboss in: Introduce Yourself – New members start here!
- 3
- 3
- 24 June 2025 at 22:39
  Howard Lewis
- Setting the top slide to turn a Morse taper
  Started by: John Purdy in: Workshop Tools and Tooling
- 17
- 21
- 24 June 2025 at 21:52
  Nigel Graham 2
- Galatea help
  Started by: Daniel Smith 2 in: Locomotives
- 8
- 12
- 24 June 2025 at 21:40
  steve2250
- Engraving bit.
  Started by: grubscrew in: Workshop Tools and Tooling
- 3
- 4
- 24 June 2025 at 21:00
  grubscrew
- Workshop Practice Series – Books
  Started by: flatline in: Beginners questions
- 4
- 5
- 24 June 2025 at 18:30
  duncan webster 1
- Digital Leadscrew Lathes
  Started by: Chris Taylor 3 in: General Questions
- 6
- 12
- 24 June 2025 at 16:47
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies