Northumbrian Duplicate gland drawings

This topic has 1 reply, 1 voice, and was last updated 9 January 2010 at 16:04 by ColinW.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
9 January 2010 at 16:04 #47223
ColinW
Participant
@colinw
Hi,

In the latest issue of ME (4368), page14, there is an error in the Northumbrian construction article. The drawing showing the piston and valve gland is duplicated.

Should the second drawing be of the steam chest, cover and value?

ColinW
Advert

9 January 2010 at 16:04 #921
ColinW
Participant
@colinw
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Tractor meeting in Babenhausen with a small model exhibition
  Started by: Werner Schleidt in: Traction engines
- 1
- 1
- 14 September 2026 at 18:55
  Werner Schleidt
- Arc closure and popularity of Chineese lathes
  Started by: File Handle in: The Tea Room
- 2
- 2
- 14 September 2026 at 18:54
  JasonB
- CLarke C430 lathe threading
  Started by: tatler in: Help and Assistance! (Offered or Wanted)
- 1
- 1
- 14 September 2026 at 18:44
  tatler
- … I had hoped we were growing-out of this nonsense !
  Started by: Michael Gilligan in: The Tea Room
- 7
- 9
- 14 September 2026 at 18:44
  JohnF
- Ideas needed for problem wth Tom Senior E type Mill
  Started by: Mike Crossfield in: Manual machine tools
- 1
- 1
- 14 September 2026 at 18:16
  Mike Crossfield
- Denford Viceory TDS 1/1 GBL lathe
  Started by: sean logie in: General Questions
- 4
- 6
- 14 September 2026 at 18:11
  Richard B
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 6
- 13
- 14 September 2026 at 18:07
  Mick Bailey
- Quorn Belt Guard
  Started by: John Purdy in: 3D Printers and 3D Printing
- 9
- 11
- 14 September 2026 at 17:17
  John Haine
- Octopus Heat Pump 1 2
  Started by: Michael Gilligan in: The Tea Room
- 18
- 46
- 14 September 2026 at 17:13
  Dave Wootton
- Source of milling cutters post Arceurotradw
  Started by: Mike Crossfield in: Workshop Tools and Tooling
- 12
- 14
- 14 September 2026 at 16:47
  Graeme Seed
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 4
- 12
- 14 September 2026 at 16:29
  JasonB
- 3 1/2” gauge loco, coupling height?
  Started by: Paul McDonough in: Locomotives
- 5
- 6
- 14 September 2026 at 15:19
  Bazyle
- Making curved parts
  Started by: Steve Huckins in: Beginners questions
- 6
- 10
- 14 September 2026 at 12:05
  Chris Gunn
- Question about GHT’s retracting topslide drawing 1 2
  Started by: ega in: Workshop Tools and Tooling
- 9
- 28
- 14 September 2026 at 11:35
  ega
- WARNING: Phishing Attempt on MMEE Bookings?
  Started by: Nigel Graham 2 in: Exhibitions, Shows and Club Events
- 3
- 3
- 14 September 2026 at 11:34
  JohnF
- Have I got 12-28 UNF wrong or has Völkel?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 7
- 10
- 14 September 2026 at 08:39
  JasonB
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 47
- 182
- 14 September 2026 at 08:27
  JasonB
- Drive coil ampere turns for seconds pendulum
  Started by: carlw in: Clocks and Scientific Instruments
- 3
- 7
- 14 September 2026 at 03:24
  carlw
- LG Smart TVs
  Started by: Michael Gilligan in: The Tea Room
- 11
- 14
- 13 September 2026 at 18:12
  Michael Gilligan
- Seig sx2p mill
  Started by: BOB BLACKSHAW 1 in: Manual machine tools
- 3
- 8
- 13 September 2026 at 13:12
  Ches Green UK
- Wilson Slant Bed Lathe
  Started by: JC54 in: Manual machine tools
- 7
- 16
- 13 September 2026 at 11:44
  odubhain82
- Steam Traction World in administration
  Started by: Baldric in: The Tea Room
- 13
- 21
- 12 September 2026 at 21:28
  Nigel Graham 2
- Model Engineer & Workshop 1 2
  Started by: Tony Watson 3 in: Model Engineer & Workshop
- 18
- 30
- 12 September 2026 at 20:44
  duncan webster 1
- Oilstones / Waterstones
  Started by: Grindstone Cowboy in: General Questions
- 7
- 14
- 12 September 2026 at 16:57
  Grindstone Cowboy
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 22
- 51
- 12 September 2026 at 16:49
  Mick B1

Northumbrian Duplicate gland drawings

Northumbrian Duplicate gland drawings

Latest Replies

Latest Issue

September 2026

Newsletter Sign-up

Latest Replies