Naerok milling machine manual

[Mike JosephParticipant @mikejoseph75242]

HI

A close friend has a Naerok RD50 350M milling machine and is concerned about maintenance of the main spindly bearings. He thinks they are sealed units but is not sure.

Is there anyone with the same or similar machine who may be able to provide a copy of the manual or any other documentation that might help please?

Cost of copies, etc happily paid.

Naerok Ltd seems to have gone in the early 1990s. Shame since I have a vertical drill of their's that does the stuff ok.

thanks, Mike

[Mike JosephParticipant @mikejoseph75242]

[john fletcher 1Participant @johnfletcher1]

Hello Mike I have a RDM 350 and hand book for it, but it doesn't show or tell you much. I can send you a copy, send me a PM with your address. I've had my machine for more than 30 years and haven't needed to do much to it . Done lots of mods following articles in Model Engineer 1989 by George Turner. John

[Richard S2Participant @richards2]

Here is a link to a previous topic on the Mill in question.

It has a link to an example of the basic Manual to save effort of posting a copy-

RDM350

[john fletcher 1Participant @johnfletcher1]

Thank you for that Richard S2, save me having to sending details via the post. John

[Mike JosephParticipant @mikejoseph75242]

Great! Thank you everyone. This is why I like model engineering (or as I refer to it: mangling metal).

Duly printed off.

Cheers.

[Ian S CParticipant @iansc]

Put Naerok mill in the window with keyword in it, click down all topics and you will get the Naerok mill manual, could be useful.

Ian S C

[LynneParticipant @lynne]

John Fletcher1 John, Ihave sent you a PM. Lynne

[Author]

Posts