Hi from Somerset

Hi from Somerset

This topic has 4 replies, 4 voices, and was last updated 27 May 2018 at 15:47 by Neil Wyatt.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
26 May 2018 at 23:36 #355526
ross c
Participant
@rossc
Oops managed to miss this bit before posting a question!

Hi, had a Hobbymat lathe for a year now and have been learning how to get the best of it.

Enjoying the freedom to make parts for my bikes..how did I live without one before!!

Cheers
Advert

26 May 2018 at 23:36 #40327
ross c
Participant
@rossc
27 May 2018 at 11:25 #355558
SillyOldDuffer
Moderator
@sillyoldduffer
Hi Ross, and welcome. Can't help with your 'How do I get a Hobbymat Motor apart?' question I'm afraid. I'm sure someone knows, fingers crossed they spot the question!

Dave
27 May 2018 at 14:02 #355583
David George 1
Participant
@davidgeorge1
Hi Ross welcome to the forum. What bikes do you have, just ask for any info but pictures help and hope you get the motor apart.

David
27 May 2018 at 15:47 #355591
Neil Wyatt
Moderator
@neilwyatt
Hi Ross,

Welcome aboard the forum.

Neil
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Reconstruction of dimensions fom a photo…
  Started by: Robin Graham in: Beginners questions
- 5
- 8
- 27 August 2026 at 02:24
  Michael Gilligan
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2 3
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 54
- 27 August 2026 at 00:36
  David Frith
- Photography in the workshop (for the inept)
  Started by: Pippin in: Workshop Techniques
- 9
- 13
- 26 August 2026 at 23:36
  Paul Lousick
- I built another one …
  Started by: Mick B1 in: Work In Progress and completed items
- 2
- 2
- 26 August 2026 at 23:29
  bernard towers
- Cutting 25 thou grooves for a couple of circlips
  Started by: Andrew Tinsley in: General Questions
- 9
- 20
- 26 August 2026 at 21:17
  Andrew Tinsley
- Taper turning attachment
  Started by: Bernard Reilly in: Workshop Tools and Tooling
- 6
- 8
- 26 August 2026 at 20:56
  Clive Foster
- Toolroom Takeover 2026
  Started by: Pippin in: The Tea Room
- 2
- 2
- 26 August 2026 at 20:40
  Michael Gilligan
- Stuart 10V conn rod
  Started by: Neil A in: Materials
- 3
- 4
- 26 August 2026 at 19:32
  Mick B1
- Ketan Swali 1 2 3
  Started by: Bill Davies 2 in: The Tea Room
- 44
- 51
- 26 August 2026 at 18:55
  Bill Dawes
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 12
- 19
- 26 August 2026 at 18:16
  JasonB
- Chronos closing down. 1 2 3 4
  Started by: Andrew Tinsley in: General Questions
- 35
- 80
- 26 August 2026 at 18:04
  Roderick Jenkins
- 1904 Whitehead Vertical Gas Engine
  Started by: JasonB in: I/C Engines
- 3
- 7
- 26 August 2026 at 16:44
  JasonB
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 21
- 26 August 2026 at 16:10
  Derek Drover
- Scam response to advert
  Started by: Lee Rogers in: The Tea Room
- 2
- 2
- 26 August 2026 at 16:04
  Derek Drover
- Parting off 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 19
- 42
- 26 August 2026 at 12:50
  Howard Lewis
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 30
- 97
- 26 August 2026 at 10:47
  bernard towers
- Survival Challenge TV for engineers!
  Started by: Neil Wyatt in: The Tea Room
- 14
- 23
- 26 August 2026 at 10:21
  noel shelley
- Drill grinders/sharpeners and their capabilities
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 9
- 20
- 26 August 2026 at 09:32
  Pippin
- Nameplate Identification
  Started by: onarion67 in: Workshop Techniques
- 4
- 8
- 25 August 2026 at 19:07
  Martin Johnson 1
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 6
- 11
- 25 August 2026 at 17:15
  Speedy Builder5
- Annealing extruded acrylic
  Started by: Mick Bailey in: Materials
- 1
- 1
- 25 August 2026 at 09:49
  Mick Bailey
- Myford Lathe Identification
  Started by: Captain Barnacles in: Manual machine tools
- 8
- 14
- 25 August 2026 at 08:40
  Howard Lewis
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 238
- 25 August 2026 at 05:37
  Lex Davis
- Modifying the OKMO P51 Friction Clutch for a Model Steam Engine
  Started by: Blue Heeler in: Work In Progress and completed items
- 1
- 1
- 25 August 2026 at 01:20
  Blue Heeler
- What parting off tool and how to get parallel faces?
  Started by: interferencefit in: Beginners questions
- 14
- 20
- 24 August 2026 at 17:31
  old mart

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies