angle plate

[celso ari schlichtingParticipant @celsoarischlichting85092]

how i made my symple angle plate:

**LINK**

greetings from Brazil

Celso Ari

[celso ari schlichtingParticipant @celsoarischlichting85092]

[Bill Davies 2Participant @billdavies2]

Unfortunately, Celso Ari, the video is private.

Bill

[David George 1Participant @davidgeorge1]

Nice job they look sturdy.

David

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Bill Davies 2 on 18/10/2019 20:09:33:

Unfortunately, Celso Ari, the video is private.

.

Presumably corrected now

MichaelG.

[Thor 🇳🇴Participant @thor]

Nice angle plates and thanks for sharing, I made something similar a few years ago but borrowed my friends angleplate when machining the two large sides.

Thor

[old martParticipant @oldmart]

Interesting project, I like watching these for tips on how to do different things.

[norman valentineParticipant @normanvalentine78682]

I could not understand how you ensured that they were at right angles.

[old martParticipant @oldmart]

The machining/grinding of the faces seemed to be left out of the video.

[Russell EberhardtParticipant @russelleberhardt48058]

Norman, when I did this many years ago I started by machining a pair of circular squares on the lathe, clamped them vertically to the mill table, and then clamped the square to be machined to those. That way you don't need an accurate square to start with.

Russell

[Tim StevensParticipant @timstevens64731]

Sorry, but my (mother tongue) English cannot cope with circular squares.

Tim

[Mike PooleParticipant @mikepoole82104]

How about cylindrical squares then Tim?

Mike

[Thor 🇳🇴Participant @thor]

Harold Hall calls them Cylidrical Squares, they work well.

Thor

(My old fingers aren't quick enough)

Edited By Thor on 20/10/2019 18:08:00

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Thor on 20/10/2019 18:06:20:

Harold Hall calls them Cylidrical Squares, they work well.

Thor

(My old fingers aren't quick enough)

Edited By Thor on 20/10/2019 18:08:00

.

Your old fingers were flying so fast that you omitted the ‘n’

MichaelG.

[Thor 🇳🇴Participant @thor]

Michael, you spotted my typo, my old eyes didn't.

Thor

[Tim StevensParticipant @timstevens64731]

Oh, them. Then you don't indeed need an accurate square to start with, but you do need a pair of accurately 'right' cylinders. That's right as in right triangle.

All cleared up now – thanks.

Tim

[GeorgineerParticipant @georgineer]

Posted by Thor on 20/10/2019 18:58:34:

Michael, you spotted my typo, my old eyes didn't.

Thor

… a sight for Thor eyes?

George

[Author]

Posts