4.1/2″ traction engine gears

4.1/2″ traction engine gears

This topic has 7 replies, 4 voices, and was last updated 6 January 2022 at 13:53 by Howard Standring 1.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
6 January 2022 at 09:05 #28500
Howard Standring 1
Participant
@howardstandring1
Can anyone recommend a person or company who can cut gears ?
Advert

6 January 2022 at 09:05 #578789
Howard Standring 1
Participant
@howardstandring1
Hello.

Over the recent couple of years, I've been building a Burrell 4.1/2" gauge traction engine. It's nearing completion and needs the gears to be cut.

I don't have gear cutting experience or the necessary tooling and would prefer to to have someone do these for me.

If you have any personal experience with such a person or company, I'd be very grateful to hear from you.

Kind regards

Howard
6 January 2022 at 09:38 #578792
Former Member
Participant
@formermember12892
[This posting has been removed]
6 January 2022 at 11:27 #578829
JasonB
Moderator
@jasonb
Adrian Nuting will do gears for engines other than the range he sells

Edited By JasonB on 06/01/2022 12:55:34
6 January 2022 at 12:54 #578848
Chris Gunn
Participant
@chrisgunn36534
Howard plus one for Adrian Nutting, or Apple Gears in Wellingborough, Northants.

Chris Gunn
6 January 2022 at 13:48 #578863
Howard Standring 1
Participant
@howardstandring1
Hi Bill / Chris

Many thanks for your prompt replies.

If you can please provide contact details of LSM and Adrian Nutting, this would be helpful.

Thank you.
6 January 2022 at 13:50 #578864
JasonB
Moderator
@jasonb
If you click on the bold type in my previous post that takes you to Adrian's site or click the bold here for LSM

Edited By JasonB on 06/01/2022 13:50:40
6 January 2022 at 13:53 #578870
Howard Standring 1
Participant
@howardstandring1
Thank you.
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What Did You Do Today 2025 1 2 … 6 7
  Started by: JasonB in: The Tea Room
- 32
- 168
- 27 June 2025 at 08:26
  bernard towers
- Dial test indicator vs Dial indicator
  Started by: martian in: Workshop Tools and Tooling
- 11
- 14
- 27 June 2025 at 07:17
  JasonB
- Is Green Hammerite really so ‘infra dig ‘ ?
  Started by: Michael Gilligan in: The Tea Room
- 9
- 11
- 27 June 2025 at 07:00
  Howard Lewis
- My experiences with an ELS lathe
  Started by: David Senior in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 6
- 9
- 27 June 2025 at 06:56
  JasonB
- Pulley taper – Herbert B drill
  Started by: gerry madden in: Manual machine tools
- 8
- 19
- 27 June 2025 at 06:28
  Howard Lewis
- Offen screw type telescopic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 2
- 3
- 27 June 2025 at 03:47
  Michael Gilligan
- Iron ore reduction
  Started by: duncan webster 1 in: The Tea Room
- 5
- 7
- 27 June 2025 at 01:49
  not done it yet
- road registration and traction trailer.
  Started by: RRMBK in: Traction engines
- 4
- 5
- 27 June 2025 at 00:01
  Plasma
- TuffSaws?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 3
- 3
- 26 June 2025 at 20:41
  IanT
- Meddings MF4 Manual
  Started by: Richard Kirkman 1 in: Help and Assistance! (Offered or Wanted)
- 7
- 11
- 26 June 2025 at 19:26
  larry phelan 1
- Vee micrometer
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 9
- 22
- 26 June 2025 at 19:24
  Graeme Seed
- Amadeal AMABL210E Review – Any Requests?
  Started by: JasonB in: Model Engineer & Workshop
- 12
- 25
- 26 June 2025 at 19:19
  JasonB
- Octopus … Is there method in this madness ? 1 2
  Started by: Michael Gilligan in: The Tea Room
- 19
- 36
- 26 June 2025 at 18:30
  not done it yet
- 3″ Burrell build
  Started by: Deric in: Traction engines
- 8
- 22
- 26 June 2025 at 18:20
  RRMBK
- Help for DIY lathe build. 1 2
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 16
- 29
- 26 June 2025 at 14:43
  moogie
- TurboCAD Snaps and Dimensioning? 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 8
- 26
- 26 June 2025 at 13:56
  Nigel Graham 2
- Woodward/Wilding Gearless clock
  Started by: smf in: Clocks and Scientific Instruments
- 2
- 2
- 26 June 2025 at 09:55
  Michael Gilligan
- Mardrive component Misplaced motor component
  Started by: martin baker in: Workshop Tools and Tooling
- 8
- 20
- 26 June 2025 at 09:53
  Colin D
- Readability / clarity in new combined magazine
  Started by: Trevor Gale in: Model Engineer & Workshop
- 16
- 23
- 26 June 2025 at 07:03
  David Senior
- Maisie lubricator
  Started by: ferroequinologist in: Locomotives
- 7
- 10
- 25 June 2025 at 23:14
  Paul Lousick
- ME beam engine 1 2
  Started by: Jager in: Stationary engines
- 12
- 29
- 25 June 2025 at 20:43
  Malcolm Timmis
- Motorised Adept No. 2 Shaper
  Started by: William Ayerst in: Workshop Tools and Tooling
- 9
- 21
- 25 June 2025 at 20:20
  Michael Gilligan
- A Book Review – slide-rules at the ready
  Started by: Nigel Graham 2 in: The Tea Room
- 3
- 4
- 25 June 2025 at 14:46
  Nigel Graham 2
- Spoilboard Ideas?
  Started by: Steve355 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 22
- 25 June 2025 at 11:31
  John Haine
- Fobco 10 eight drill, NVR problem
  Started by: dareay42 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 3
- 5
- 25 June 2025 at 10:40
  dareay42

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies