1/4 ” Thinwalled Stainless Steel Tubing

1/4 ” Thinwalled Stainless Steel Tubing

This topic has 6 replies, 4 voices, and was last updated 3 November 2016 at 13:41 by Johannes Grabsch.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
3 November 2016 at 12:57 #264573
Johannes Grabsch
Participant
@johannesgrabsch91508
Hallo

Can anybody please name a supplier of 1/4 " Thinwalled Stainless Steel Tubing?

I am looking for 4 pieces 800 or 1000 mm long, to be used in making Superheaters.

Johannes
Advert

3 November 2016 at 12:57 #29647
Johannes Grabsch
Participant
@johannesgrabsch91508
3 November 2016 at 13:10 #264574
JasonB
Moderator
@jasonb
Have you tried MACC? they should be able to cut to length as will M-machine
3 November 2016 at 13:22 #264577
John Baguley
Participant
@johnbaguley78655
I get mine from Southern Temperature Sensors:

http://www.southerntemp.co.uk/

They do much thinner wall tubing (316L) than the ME suppliers in both metric and imperial sizes. They also advertise on Ebay but usually only in short lengths.

Usual disclaimer.

John
3 November 2016 at 13:25 #264579
david homer
Participant
@davidhomer12226
You could try BES Ltd they 1/4" x 20g
3 November 2016 at 13:29 #264580
JasonB
Moderator
@jasonb
Out of interest what actual thickness is it you are after as one mans thin may be anothers thick?

For example the thinnest wall 1/4" tube that Johns supplier lists is as thin as the one done by Macc

Edited By JasonB on 03/11/2016 13:32:00
3 November 2016 at 13:41 #264581
Johannes Grabsch
Participant
@johannesgrabsch91508
Forgot to say: 20 g

Johannes
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Softening epoxy 1 2
  Started by: John Haine in: General Questions
- 22
- 39
- 31 August 2025 at 22:51
  Cyril Bonnett
- Myford VMB mill, head lift.
  Started by: lctikka61 in: Manual machine tools
- 5
- 8
- 31 August 2025 at 22:45
  lctikka61
- End Mill Sharpening Jig
  Started by: Vic in: Workshop Tools and Tooling
- 10
- 21
- 31 August 2025 at 22:38
  Vic
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 118
- 31 August 2025 at 22:18
  Colin Creed
- Thread form of medical ‘screws’.
  Started by: JimmieS in: The Tea Room
- 5
- 6
- 31 August 2025 at 22:14
  Michael Gilligan
- Alternatives for a DRO display change
  Started by: John Hinkley in: General Questions
- 6
- 15
- 31 August 2025 at 21:31
  John Hinkley
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 40
- 31 August 2025 at 20:23
  David Frith
- Parting off on a mini lathe
  Started by: Andy Brocklehurst in: Beginners questions
- 17
- 22
- 31 August 2025 at 17:40
  Howard Lewis
- Folding Knife
  Started by: Vic in: The Tea Room
- 5
- 7
- 31 August 2025 at 16:47
  Robert Atkinson 2
- What Did You Do Today 2025 1 2 … 9 10
  Started by: JasonB in: The Tea Room
- 37
- 237
- 31 August 2025 at 16:20
  Dalboy
- Sensitive tailstock for mini lathe
  Started by: dk0 in: Workshop Tools and Tooling
- 10
- 23
- 31 August 2025 at 15:42
  old mart
- Feed Water
  Started by: Richard Simpson in: General Questions
- 13
- 25
- 31 August 2025 at 14:08
  cogdobbler
- Dickson Tooling Offer
  Started by: JohnF in: Hints And Tips for model engineers
- 12
- 15
- 31 August 2025 at 10:57
  southernchap
- Milling for beginners book, Where?
  Started by: andy198712 in: Beginners questions
- 9
- 16
- 31 August 2025 at 10:34
  southernchap
- NU tool milling machine
  Started by: joseph tatler in: Manual machine tools
- 8
- 12
- 31 August 2025 at 10:15
  southernchap
- My week this week! My workshop videos 1 2 … 11 12
  Started by: Phil Whitley in: The Tea Room
- 16
- 298
- 30 August 2025 at 18:55
  Phil Whitley
- Mesh Communication
  Started by: Vic in: The Tea Room
- 4
- 5
- 30 August 2025 at 18:17
  Vic
- Bendy Flexible Plywood
  Started by: Henry Buckeldee in: Related Hobbies including Vehicle Restoration
- 16
- 24
- 30 August 2025 at 17:05
  Henry Buckeldee
- Bassett Lowke “Eclipse”
  Started by: JasonB in: Stationary engines
- 6
- 22
- 30 August 2025 at 16:42
  Jim Nic
- DRO Zero position (a bit academic I know)
  Started by: Lee Reynolds 1 in: Electronics in the Workshop
- 4
- 5
- 30 August 2025 at 14:30
  Lee Reynolds 1
- 125 mm chuck onto my lathe
  Started by: Steve Huckins in: General Questions
- 13
- 20
- 30 August 2025 at 14:20
  HOWARDT
- Mercer comparator gauge repair help.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 4
- 12
- 30 August 2025 at 13:43
  Graeme Seed
- Painting mating surfaces
  Started by: Martin Cooper in: Beginners questions
- 11
- 21
- 30 August 2025 at 13:26
  JasonB
- Be Aware of Scammers
  Started by: Neil Wyatt in: Website Announcements
- 1
- 1
- 30 August 2025 at 12:36
  Neil Wyatt
- Sourcing Dexion SpeedFrame beam section
  Started by: Greensands in: General Questions
- 5
- 5
- 30 August 2025 at 09:36
  Clive Foster

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

September 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies