+Sanding a block of square milled lengths in one go

This topic has 3 replies, 2 voices, and was last updated 1 February 2017 at 21:41 by Martin Newbold.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
1 February 2017 at 21:27 #8541
Martin Newbold
Participant
@martinnewbold
Advert

1 February 2017 at 21:28 #281833
Martin Newbold
Participant
@martinnewbold
Is there a way to sand of multiple lengths by strapping the four square pieces together to get a flat sand across them all on a linishing machine?
1 February 2017 at 21:39 #281838
MW
Participant
@mw27036
Posted by Martin Newbold on 01/02/2017 21:28:00:

Is there a way to sand of multiple lengths by strapping the four square pieces together to get a flat sand across them all on a linishing machine?

Yeah, it's called tape masking tape would be better (fewer marks to sort out than harsher adhesives). Make sure you have even pressure across the blocks.

Michael W

Edited By Michael-w on 01/02/2017 21:40:01
1 February 2017 at 21:41 #281840
Martin Newbold
Participant
@martinnewbold
Thanks

M
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- New to castings
  Started by: BOB BLACKSHAW 1 in: Workshop Techniques
- 4
- 9
- 27 September 2026 at 12:09
  BOB BLACKSHAW 1
- Warco VMC start capacitor
  Started by: Durhambuilder in: Electronics in the Workshop
- 2
- 3
- 27 September 2026 at 12:06
  Durhambuilder
- Wired doorbell to wireless
  Started by: Another JohnS in: General Questions
- 7
- 11
- 27 September 2026 at 11:51
  duncan webster 1
- Railmotor regulator drawings
  Started by: duncan webster 1 in: Locomotives
- 2
- 3
- 27 September 2026 at 11:26
  duncan webster 1
- Model engineering’s (live steam) big five
  Started by: Luker in: Locomotives
- 6
- 12
- 27 September 2026 at 10:20
  JasonB
- Archive
  Started by: gregmallitt in: Introduce Yourself – New members start here!
- 3
- 3
- 27 September 2026 at 09:40
  Zan
- Octopus Heat Pump 1 2 3 4
  Started by: Michael Gilligan in: The Tea Room
- 25
- 92
- 27 September 2026 at 07:36
  Michael Gilligan
- Gears
  Started by: Franco Convertini in: General Questions
- 6
- 8
- 27 September 2026 at 06:56
  JasonB
- finding involute gear cutter
  Started by: vic newey in: Workshop Techniques
- 8
- 13
- 27 September 2026 at 06:01
  John Haine
- Taylor Hobson cutter grinder modificaton 1 2
  Started by: David George 1 in: Workshop Tools and Tooling
- 11
- 43
- 27 September 2026 at 00:37
  Mark Rand
- C/H pipe clamp query
  Started by: Mike Hurley in: The Tea Room
- 12
- 14
- 26 September 2026 at 22:11
  Nicholas Farr
- The Big St Albans Model Show
  Started by: Bazyle in: Exhibitions, Shows and Club Events
- 1
- 4
- 26 September 2026 at 21:59
  Bazyle
- Warco WM180 4 way tool post
  Started by: Andy Brocklehurst in: General Questions
- 9
- 16
- 26 September 2026 at 21:42
  southernchap
- Ideas needed for problem wth Tom Senior E type Mill 1 2
  Started by: Mike Crossfield in: Manual machine tools
- 12
- 26
- 26 September 2026 at 18:03
  old mart
- What to do about son’s inheritance.
  Started by: Terry Nicholas in: General Questions
- 1
- 1
- 26 September 2026 at 15:20
  Terry Nicholas
- Worm gear
  Started by: Franco Convertini in: General Questions
- 11
- 20
- 26 September 2026 at 14:32
  ega
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 333
- 26 September 2026 at 14:25
  Phil Whitley
- What Did You Do Today 2026 1 2 … 7 8
  Started by: JasonB in: The Tea Room
- 48
- 186
- 26 September 2026 at 13:38
  John Hinkley
- Oh dear. What have I done: Wonky Super Major!
  Started by: Colin Thorburn in: Manual machine tools
- 4
- 8
- 26 September 2026 at 10:39
  John Hinkley
- Rob Roy – Order of removal the boiler from the frames
  Started by: Greensands in: Help and Assistance! (Offered or Wanted)
- 4
- 12
- 25 September 2026 at 18:17
  duncan webster 1
- Green Arrow by Martin Evans
  Started by: tatler in: Locomotives
- 4
- 5
- 25 September 2026 at 16:21
  tatler
- Su251-53 1 2
  Started by: parovoz in: Locomotives
- 15
- 29
- 25 September 2026 at 12:54
  Bill Dawes
- Inserting An Angled Feature (Alibre Atom) 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 4
- 33
- 24 September 2026 at 23:51
  Nigel Graham 2
- Drive coil ampere turns for seconds pendulum 1 2
  Started by: carlw in: Clocks and Scientific Instruments
- 6
- 41
- 24 September 2026 at 21:29
  John Haine
- Parting off 1 2 3
  Started by: Peter Simpson 3 in: Beginners questions
- 22
- 52
- 24 September 2026 at 18:55
  old mart

+Sanding a block of square milled lengths in one go

+Sanding a block of square milled lengths in one go

Latest Replies

Latest Issue

October 2026

Newsletter Sign-up

Latest Replies