fairbanks 3 cylinder

This topic has 6 replies, 3 voices, and was last updated 24 June 2016 at 21:53 by Johan van Zanten.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
24 June 2016 at 18:22 #244037
kevin beevers
Participant
@kevinbeevers61752
has anyone built one of these engines,if so where can i get the plans.

kevin
Advert

24 June 2016 at 18:22 #24603
kevin beevers
Participant
@kevinbeevers61752
24 June 2016 at 20:11 #244047
JasonB
Moderator
@jasonb
The 1/8th scale castings of the 80hp were done by Pacific Model Design (PMD), same company that did teh castings for teh Monitor that I made a couple of years ago. Unfortunately they went out of business and the patterns went somewhere but at the moment no new castings have appeared.

You may get lucky asking in teh Scale model section on Smokstak forum and find someone willing to share some plans. I have a feeling I have seen one done without casting, will have a look later.

J

Edited By JasonB on 24/06/2016 20:17:13
24 June 2016 at 20:27 #244049
JasonB
Moderator
@jasonb
Chuck Fellows was doing a barstock one, not sure how far he has got as he had some health issues though it is designed to run on air not a real IC.

Edit, Its finished but a bit more basic than the PMD oen

If you could go for a two cylinder slightly open crank engine then the Frisco Standard is quite nice.

Edited By JasonB on 24/06/2016 20:27:23

Edited By JasonB on 24/06/2016 20:30:43
24 June 2016 at 20:27 #244050
kevin beevers
Participant
@kevinbeevers61752
much apreciated jasonb.chers
24 June 2016 at 20:39 #244055
JasonB
Moderator
@jasonb
Four Cylinder Bruce-macbeth was featured in HSM mag with drawings though not seen them but it looks a nice engine along teh same lines as the FM
24 June 2016 at 21:53 #244068
Johan van Zanten
Participant
@johanvanzanten
Hi Kevin, Some years ago I made one in scale 1:10. See my album. http://www.model-engineer.co.uk/albums/member_album.asp?a=6778 Regards, Johan.
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Sealed Lead-Acid Battery
  Started by: Michael Gilligan in: Electronics in the Workshop
- 3
- 4
- 28 July 2026 at 06:11
  Michael Gilligan
- Basic(?) Milling question
  Started by: paulmichael1084 in: Beginners questions
- 4
- 5
- 28 July 2026 at 00:36
  Pete
- Garden water pump
  Started by: John MC in: The Tea Room
- 12
- 21
- 28 July 2026 at 00:21
  Nigel Graham 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 14
- 42
- 27 July 2026 at 23:58
  Nigel Graham 2
- blackgates eng 1 2
  Started by: Peter Daw in: Beginners questions
- 21
- 35
- 27 July 2026 at 23:41
  Nigel Graham 2
- Silver Soldering
  Started by: Jss in: General Questions
- 11
- 18
- 27 July 2026 at 23:36
  duncan webster 1
- Boiler explosion on Guadeloupe.
  Started by: howardb in: The Tea Room
- 5
- 7
- 27 July 2026 at 22:59
  howardb
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 20
- 88
- 27 July 2026 at 21:59
  paulmichael1084
- Bengs kits
  Started by: paul1956 in: Beginners questions
- 5
- 8
- 27 July 2026 at 17:37
  duncan webster 1
- New motor for a Myford super 7
  Started by: Hollowpoint in: Electronics in the Workshop
- 12
- 16
- 27 July 2026 at 17:29
  john fletcher 1
- Latest new addon for FreeCAD!!
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 2
- 4
- 27 July 2026 at 16:15
  Speedy Builder5
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 233
- 27 July 2026 at 16:15
  Andrew Skinner
- chester conquest pcb board connections
  Started by: In Wilson in: Introduce Yourself – New members start here!
- 6
- 15
- 27 July 2026 at 13:35
  Hugh Stewart-Smith 1
- Peat-Shaped [ ref. Verdict DTI ]
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 1
- 1
- 27 July 2026 at 12:40
  Michael Gilligan
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 28
- 94
- 27 July 2026 at 09:27
  not done it yet
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 19
- 27 July 2026 at 06:29
  Peter Hoerlein
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 7
- 15
- 27 July 2026 at 00:45
  Blue Heeler
- Long awaited FreeCAD version 1.1 released
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 3
- 9
- 26 July 2026 at 15:36
  Russell Eberhardt
- Looking for detailed build logs to help decide next project
  Started by: GrahamS in: Stationary engines
- 4
- 8
- 26 July 2026 at 10:57
  GrahamS
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 12
- 25
- 26 July 2026 at 07:58
  Dalboy
- Buzz Ballz packaging “unrecyclable” in U.K.
  Started by: Michael Gilligan in: The Tea Room
- 6
- 6
- 25 July 2026 at 23:16
  Bazyle
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 325
- 25 July 2026 at 19:23
  Phil Whitley
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 10
- 18
- 25 July 2026 at 17:12
  Pippin
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 7
- 24 July 2026 at 22:32
  Michael Gilligan
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 9
- 24 July 2026 at 20:22
  bernard towers

fairbanks 3 cylinder

fairbanks 3 cylinder

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies