Threaded Bar Rod Studding

This topic has 13 replies, 10 voices, and was last updated 3 June 2012 at 13:37 by Kevin Bennett.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
1 June 2012 at 18:38 #91905
Kevin Bennett
Participant
@kevinbennett25223
hi help needed for a supplier in the UK for 9/16 BSW studding i have spent the last hour on the Internet looking with no luck.

it is to repair 2 sash clamps and it has to be 9/16 BSW

can someone point me in the right direction

thanks Kevin
Advert

1 June 2012 at 18:38 #22114
Kevin Bennett
Participant
@kevinbennett25223
1 June 2012 at 19:20 #91909
Keith Long
Participant
@keithlong89920
Hi Kevin

Good luck with your search, but you should be aware that 50 years ago 9/16 BSW was listed as a non preferred size to be avoided where possible. (Kempes Engineers Handbook 1965 edition).

If you really want to repair the clamps you might be better off getting a die and cutting your own on some suitable rod!

Keith
1 June 2012 at 19:36 #91911
V8Eng
Participant
@v8eng
Might be worth asking these people, they supply all sorts of hard to get fixings etc.

**LINK**

Regards.
1 June 2012 at 19:41 #91912
NJH
Participant
@njh
Hi Kevin

If you decide to go along the D-I-Y route you can find the die here

Not too cheap an option – although for a one off job the carbon steel version should be OK.

regards

Norman

Edited By NJH on 01/06/2012 19:42:57
1 June 2012 at 20:24 #91919
Les Jones 1
Participant
@lesjones1
Hi kevin,
The only listing I can find for 9/16" BSW is in stainless steel and the company does not give a price. This is the company.

Les.
1 June 2012 at 21:18 #91924
JasonB
Moderator
@jasonb
Is it definately Whitworth form as UNC is also 12tpi at that diameter.

J
1 June 2012 at 22:11 #91925
robert ramage
Participant
@robertramage25020
Hi Kevin. what sort of length are you after?
1 June 2012 at 22:12 #91926
Kevin Bennett
Participant
@kevinbennett25223
yes it is definitely BSW checked several times i am also looking at 14mm as well.

2 off at 8" long

Ty Kevin

Edited By Kevin Bennett on 01/06/2012 22:14:42
1 June 2012 at 23:51 #91936
Martin W
Participant
@martinw
Hi

It might be worth contacting GWR Fasteners on Ebay as they stock a fairly large range of BZP studding in BSW sizes. While I didn't see 9/16 size they may be able to locate some or point you in the right direction.

Cheers

Martin

PS. On closer reading of the Ebay posts for studding GWR Fasteners suggest that you email them if it is not listed.

Edited By Martin W on 02/06/2012 00:06:55
2 June 2012 at 07:35 #91940
JasonB
Moderator
@jasonb
At 8" long can you not screwcut it?

J
2 June 2012 at 11:25 #91956
Tony Pratt 1
Participant
@tonypratt1
Hi, 9/16" UNC will do the job if you can obtain it!

Tony
2 June 2012 at 12:16 #91958
KWIL
Participant
@kwil
Search for BSW All Thread, gives another supplier

http://www.archerdale.com/buy-tools-fasteners.php?WEBYEP_DI=13
3 June 2012 at 13:37 #92016
Kevin Bennett
Participant
@kevinbennett25223
thanks for all the help and advice i have a few thing to think about.

TY Kevin
Author

Posts