Drummond Lathe

This topic has 9 replies, 6 voices, and was last updated 2 February 2020 at 19:38 by Adam.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
23 January 2020 at 19:51 #13761
Kenneth Deighton
Participant
@kennethdeighton43272
Advert

23 January 2020 at 19:51 #448493
Kenneth Deighton
Participant
@kennethdeighton43272
A friend has just bought an old Drummond Lathe, it is not a round bed but in its early life it was pedal operated and has now been converted to single phase electric. I am a Myford man so I have to ask the more knowledgeable readers this question , what is the unit that looks like an adjustable clutch that is situated inside the Bull Ring gear in the head stock but does not have an operating lever ?.

If anyone in the Wetherby/York area has one we would appreciate having a look at it .
23 January 2020 at 20:05 #448499
David George 1
Participant
@davidgeorge1
The ring is to disconect the front drive so you can rotate the back gear lever to drive slowly. It disconnects a plunger into the bull gear by rotating a ring with a ramp on. There is a screw with a screw driver slot, on my one to stop the ring rotating on its own as you don't want to connect both at the same time, broken gears or other damage.

David

Edited By David George 1 on 23/01/2020 20:06:54

Edited By David George 1 on 23/01/2020 20:09:50
23 January 2020 at 20:47 #448505
Nicholas Farr
Participant
@nicholasfarr14254
Hi Kenneth, have a read of this Machine manual

Regards Nick.
24 January 2020 at 21:28 #448708
David George 1
Participant
@davidgeorge1
What model is the lathe some pictures would help. I have quite a lot of information about the M type but know very little about other Drummond lathes if you need any help please ask.

David George
25 January 2020 at 14:55 #448824
Howard Lewis
Participant
@howardlewis46836
Anything on the Lathes UK website that might help?

Howard
27 January 2020 at 19:55 #449328
Kenneth Deighton
Participant
@kennethdeighton43272
Thankyou gentlemen for your replies to my request , to David George 1, how do I or my friend Keith make direct contact with you to get more info ? I have Keith's email address if we are allowed to publish it here.

Thanks. Ken .
27 January 2020 at 22:22 #449372
not done it yet
Participant
@notdoneityet
I have Keith's email address if we are allowed to publish it here.

‘Email addys are best kept to PM’s’, would be advisable. Keeps their addy out of the public domain (these threads are visible to anyone and everyone on the internet).
28 January 2020 at 08:19 #449410
David George 1
Participant
@davidgeorge1
Kenneth I have sent you a message with email address. Look at top of page here when you are logged in for inbox.

David
2 February 2020 at 19:38 #450442
Adam
Participant
@adam
I used to have an m series Drummond. In the photo that is for the back gear. You should also have a little lever to activate a cam which engages the backing gears.
Author

Posts