Willstead Stirling and model engines

Willstead Stirling and model engines

This topic has 1 reply, 1 voice, and was last updated 16 November 2011 at 00:31 by Steam.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
16 November 2011 at 00:31 #77898
Steam
Participant
@steam
The SE1-10 Stirling model is
machined from solid bar and sheet stock with West Australian wood base, the
website can be viewed here Willstead Stirling and model engines.
Advert

16 November 2011 at 00:31 #21487
Steam
Participant
@steam
Willstead Model engines, Stirling engines, hot air engines
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Tapping Trick
  Started by: Steve Withnell in: Workshop Techniques
- 12
- 13
- 18 June 2026 at 15:55
  martin haysom
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 9
- 35
- 18 June 2026 at 15:40
  jaCK Hobson
- Comm Ads
  Started by: bernard towers in: Website Questions, Comments, and Suggestions
- 3
- 17
- 18 June 2026 at 14:58
  JasonB
- Wallace valvegear simulator
  Started by: Kevan Shaw in: General Questions
- 7
- 25
- 18 June 2026 at 14:13
  Kevan Shaw
- Windows 10 disaster
  Started by: Glyn Davies in: The Tea Room
- 4
- 5
- 18 June 2026 at 14:10
  Paul Lousick
- Di Palo Milling machine Manual
  Started by: Paul Scholey in: Manual machine tools
- 2
- 5
- 18 June 2026 at 13:36
  Paul Scholey
- Clarkson Horizontal – Redefined in Metric
  Started by: JasonB in: Stationary engines
- 8
- 22
- 18 June 2026 at 13:19
  JasonB
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 51
- 18 June 2026 at 12:57
  tomcnc
- Taper Identification
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 6
- 18 June 2026 at 11:18
  Oily Rag
- Green Dragon Sustainable Fuel
  Started by: Neil Wyatt in: Locomotives
- 10
- 17
- 18 June 2026 at 10:58
  noel shelley
- Emco Compact 5 milling table restoration
  Started by: rikt in: Manual machine tools
- 3
- 5
- 18 June 2026 at 10:35
  Graham Meek
- Linear encoders 1 2
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 15
- 29
- 18 June 2026 at 10:19
  Bob Worsley
- Logging in to the forum
  Started by: old mart in: The Tea Room
- 4
- 4
- 18 June 2026 at 09:29
  Thor 🇳🇴
- Running 380V 3-phase motor on 230V 1-phase 1 2
  Started by: jimalm in: Electronics in the Workshop
- 13
- 26
- 17 June 2026 at 21:30
  Versaboss
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 15
- 18
- 17 June 2026 at 21:17
  speelwerk
- 4 cylinder rotary valve
  Started by: AStroud in: Work In Progress and completed items
- 5
- 14
- 17 June 2026 at 21:04
  old mart
- Greetings
  Started by: dee in: Introduce Yourself – New members start here!
- 5
- 5
- 17 June 2026 at 17:46
  noel shelley
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 14
- 52
- 17 June 2026 at 15:26
  duncan webster 1
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 14
- 28
- 17 June 2026 at 14:36
  Neil Wyatt
- Orbital – Not your Usual Oscillator!
  Started by: JasonB in: Stationary engines
- 12
- 19
- 17 June 2026 at 12:50
  duncan webster 1
- AJ Reeves 5 inch driving trolley bogies
  Started by: Ian R in: Locomotives
- 3
- 7
- 17 June 2026 at 08:25
  Ian R
- Axle pin question – choice of material and possible need for case hardening?
  Started by: barryblundell in: Materials
- 5
- 10
- 17 June 2026 at 01:19
  howardb
- ML7 – Zeroing the Topslide? 1 2
  Started by: Dr_GMJN in: Workshop Techniques
- 21
- 35
- 16 June 2026 at 22:18
  ega
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 4
- 5
- 16 June 2026 at 19:31
  David Jupp
- Warco DNC18 Mill/Digital Dream controllers
  Started by: Pippin in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 18
- 16 June 2026 at 15:44
  Derek cottiss

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies