Spindle speed controler

[Anonymous]

This post has been removed at the author’s request.

[Anonymous]

[Harry WilkesParticipant @harrywilkes58467]

I'm not sure what type of motor is fitted to your Sieg but whilst waiting for another answer take a look at this link

H

[Anonymous]

This post has been removed at the author’s request.

[RJWParticipant @rjw]

Carl, I have a Sieg C1 with the M1 milling attachment, the original Chinese control board was junked by the previous owner when it blew and was changed for a British manufactured unit,
I don't have the data book to hand at present, it's out in the workshop and too dark and damned cold to go out there at the mo', but I'll dig it out tomorrow and let you have the details,
The original controls on the headstock are still in place and working, photo's of it are in my albums, would think this unit plus an on/off & speed control switch would do the job for you, think they were around £100 last time I looked.

John.

[John RuddParticipant @johnrudd16576]

Ok,

We have determined that the speed controller linked to is not suitable and that the motor is ' 120 watt 240 AC)….

So how about a photo or two of what you actually have so we can help?

[Trevor Drabble 1Participant @trevordrabble1]

Carl , Have sent you a PM. Trevor.

[RJWParticipant @rjw]

Carl, some details of the Parker control unit in my Sieg, think it's a 506 in mine but can't check without stripping the top off the box,

1st link is for a .pdf user manual, second is a website which gives more detail, no connection to either concerns, just a happy user,

John

**LINK**

 

**LINK**

Edited By RJW on 22/01/2018 11:18:20

[Author]

Posts