New to model engineering.

[roy g.Participant @royg]

[roy g.Participant @royg]

Has anyone built a 5 inch gauge 0 6 0 Pansy steam loco?

I’m working to L.B.S.C. drawings and there seems to be info’ missing.

Help please.

[Ramon WilsonParticipant @ramonwilson3]

Roy

I can’t help you indepth but I can tell you that the drawings I worked to had the brake hanger pivots in the wrong position – LBSC casually refers to it in the very last instalment in ME when it was serialised. Some one approached me at a Forncett day several years ago and asked if I was aware of the mistakes in the valve gear. I contacted Reeves – this was when John Crisp ran it so quite a while back and he found an errata sheet that had been published at some stage in ME. I would suggest you track this down. I never went beyond a chassis – I parted with it to fund my workshop extension.

 

I can’t remember much about the build but it’s a popular design so I’m sure some one will be able to help

 

Hope this helps a little

 

Regards – Ramon

[JasonBModerator @jasonb]

Several errors listed on Alan Stepney’s site

 

J

[roy g.Participant @royg]

Thanks, Jason B. All very helpful; I do have the old drawings! Roy g.

[Author]

Posts