Needle valve spacing

Needle valve spacing

This topic has 3 replies, 2 voices, and was last updated 29 December 2022 at 21:50 by bricky.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
29 December 2022 at 20:00 #626656
bricky
Participant
@bricky
Having built a new carb, from the solid as I didn't make a good job of the first one,I have come to the needle valve.I need to know the distance between the needle valve tube and the input tube,inside the carb,

Frank
Advert

29 December 2022 at 20:00 #34139
bricky
Participant
@bricky
29 December 2022 at 20:08 #626657
JasonB
Moderator
@jasonb
Looks like it works out at 1/16"

Carb is 7/16 + 3/8 + 7/16 wide

the two tubes are both 7/16" of thread and 5/32" protruding from that.
29 December 2022 at 21:50 #626666
bricky
Participant
@bricky
Thanks Jason.

Frank
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- How Good Are 3D Printers?
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 5
- 5
- 15 June 2026 at 09:32
  Russell Eberhardt
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 18
- 15 June 2026 at 07:08
  Peter Hoerlein
- KMO RETROL 1/4 Scale Lister D Engine with some Mods.
  Started by: Blue Heeler in: I/C Engines
- 1
- 1
- 15 June 2026 at 04:55
  Blue Heeler
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 66
- 14 June 2026 at 21:29
  Julie Ann
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 13
- 25
- 14 June 2026 at 21:24
  Julie Ann
- Taper Identification
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 2
- 2
- 14 June 2026 at 20:46
  Chris Crew
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 7
- 8
- 14 June 2026 at 12:22
  Dave Halford
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 14
- 51
- 14 June 2026 at 11:07
  Robert Atkinson 2
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 12
- 16
- 14 June 2026 at 10:18
  alecs
- Axle pin question – choice of material and possible need for case hardening?
  Started by: barryblundell in: Materials
- 4
- 4
- 14 June 2026 at 09:21
  Russell Eberhardt
- Wallace valvegear simulator
  Started by: Kevan Shaw in: General Questions
- 7
- 23
- 13 June 2026 at 18:43
  John Purdy
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 30
- 13 June 2026 at 17:56
  jaCK Hobson
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 115
- 13 June 2026 at 15:38
  Dalboy
- Hindu ascetic in picture gallery
  Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
- 3
- 3
- 13 June 2026 at 15:37
  Neil Wyatt
- Bridgeport Milling Machine feed control module
  Started by: Mark Willis in: Workshop Tools and Tooling
- 13
- 25
- 13 June 2026 at 13:08
  henrik83
- international exhibition 1862
  Started by: duncan webster 1 in: The Tea Room
- 9
- 13
- 13 June 2026 at 11:41
  gerry madden
- Air Duster
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 4
- 5
- 13 June 2026 at 10:00
  jaCK Hobson
- Bridgeport Series 1 CNC 1 2
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 50
- 13 June 2026 at 08:43
  Les Riley
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 10
- 14
- 13 June 2026 at 08:33
  Luker
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 6
- 7
- 13 June 2026 at 08:22
  DC31k
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 30
- 12 June 2026 at 23:11
  Nigel Graham 2
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 226
- 12 June 2026 at 21:50
  Mark Rand
- Clockmaking starter project?
  Started by: Gman in: Clocks and Scientific Instruments
- 10
- 19
- 12 June 2026 at 20:21
  iacooper
- 3 1/2″ Gauge Discussion Group 1 2 3
  Started by: Neil Wyatt in: General Questions
- 37
- 70
- 12 June 2026 at 17:16
  Paul McDonough
- Boxford CUD cabinet screw sizes and threads
  Started by: lucerne in: Manual machine tools
- 7
- 10
- 12 June 2026 at 17:15
  lucerne

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies