M91 Vertical Water Cooled Hit & Miss Engine

M91 Vertical Water Cooled Hit & Miss Engine

This topic has 3 replies, 2 voices, and was last updated 11 November 2022 at 21:54 by Blue Heeler.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
11 November 2022 at 05:26 #620574
Blue Heeler
Participant
@blueheeler
M91 Vertical Water Cooled Hit & Miss Engine with lighter Governor Springs –
Advert

11 November 2022 at 05:26 #3517
Blue Heeler
Participant
@blueheeler
11 November 2022 at 08:48 #620582
Michael Gilligan
Participant
@michaelgilligan61133
Another great demonstation

MichaelG.

.

P.S. __ may I repeat my request for a look at the innards of your steam turbine ?

https://www.model-engineer.co.uk/forums/postings.asp?th=183861

Edited By Michael Gilligan on 11/11/2022 08:50:19
11 November 2022 at 21:54 #620706
Blue Heeler
Participant
@blueheeler
Thanks Michael, I haven't forgotten…..but time has forgotten me
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Boxford Cud or ML7 1 2
  Started by: Trevor Howley in: General Questions
- 22
- 39
- 11 June 2025 at 01:08
  howardb
- Building Bernard Tekippe’s Precision Regulator 1 2 … 5 6
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 14
- 136
- 10 June 2025 at 23:43
  Chris Raynerd 2
- Drilling Holes In Aluminium Tube
  Started by: Peter Goodchild in: General Questions
- 4
- 4
- 10 June 2025 at 22:51
  Bazyle
- 30w low voltage PWM controller 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 8
- 39
- 10 June 2025 at 22:36
  SillyOldDuffer
- Mystery Object Quiz
  Started by: Robert Atkinson 2 in: The Tea Room
- 4
- 5
- 10 June 2025 at 22:28
  peter1972
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 115
- 10 June 2025 at 22:10
  Colin Creed
- Unimat 3 Restoration 1 2
  Started by: Graham Meek in: Manual machine tools
- 11
- 43
- 10 June 2025 at 16:59
  Graham Meek
- Myford service engineer
  Started by: Nic Bertelsen in: General Questions
- 3
- 5
- 10 June 2025 at 16:36
  Nic Bertelsen
- Need help choosing a lathe chuck 1 2
  Started by: th1980 in: Workshop Tools and Tooling
- 19
- 27
- 10 June 2025 at 16:36
  Russell Eberhardt
- Drilling 316 Stainless Steel
  Started by: ianj in: General Questions
- 7
- 7
- 10 June 2025 at 16:32
  Martin Connelly
- Adaptation of the Proxxon Milling machine 1 2 3
  Started by: Graham Meek in: Manual machine tools
- 13
- 65
- 10 June 2025 at 16:07
  Graham Meek
- Is Evo-stik impact adhesive good for wood to plastic? Is bond long lasting? 1 2
  Started by: Simon Robinson 4 in: The Tea Room
- 14
- 26
- 10 June 2025 at 14:50
  not done it yet
- Unimat 3 mods.
  Started by: david bennett 8 in: Hints And Tips for model engineers
- 6
- 13
- 10 June 2025 at 14:30
  antrepeas
- DIY steel hardening
  Started by: Bevel in: Materials
- 9
- 13
- 10 June 2025 at 14:23
  not done it yet
- Stuart? MTB 1M
  Started by: JasonB in: Stationary engines
- 8
- 21
- 10 June 2025 at 13:59
  JasonB
- New Warco D330 – Some Advice Please
  Started by: Mark Slatter in: Manual machine tools
- 14
- 19
- 10 June 2025 at 13:17
  Mark Slatter
- Watts Precisian level
  Started by: Ian Owen NZ in: Workshop Tools and Tooling
- 7
- 9
- 10 June 2025 at 09:35
  John Hinkley
- Painting machine tools, cannot find thread
  Started by: Wade Beatty in: Manual machine tools
- 2
- 3
- 10 June 2025 at 02:02
  Wade Beatty
- Anti Virus software
  Started by: Andrew Crow in: The Tea Room
- 18
- 25
- 9 June 2025 at 23:20
  Nigel Graham 2
- 3″ Burrell build
  Started by: Deric in: Traction engines
- 8
- 21
- 9 June 2025 at 21:45
  Jeremy Dunn
- Sieg C1 lathe autofeed and screw cutting
  Started by: Rob Athome in: Beginners questions
- 13
- 23
- 9 June 2025 at 21:29
  th1980
- A modern mystery (Yanmar injectors)
  Started by: Fulmen in: The Tea Room
- 7
- 16
- 9 June 2025 at 19:49
  Fulmen
- Unusual Crow Bar Type Tool? Fire Brigade?
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 10
- 13
- 9 June 2025 at 17:46
  SillyOldDuffer
- New Member from Edinburgh | Interested in Learning More
  Started by: williamadam1 in: Introduce Yourself – New members start here!
- 4
- 4
- 9 June 2025 at 17:44
  noel shelley
- Model Turbines 1 2 … 24 25
  Started by: Turbine Guy in: Stationary engines
- 28
- 606
- 9 June 2025 at 15:11
  Turbine Guy

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

June 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies