Anilam B5 DRO sensor on a Bridgeport milling machine

[stuart levensParticipant @stuartlevens88100]

I have recently purchased a used Bridgeport Series 1 milling machine with a Miniwizard Digital readout and Anilam B5 sensors. During the move the X – axis sensor (encoder ?) was destroyed when the table was removed. The linear scale seems ok.

My fault entirely – I should have taken a little more time – but the machine was outside and it was about to rain – the table was wider than the door – so . . . .

Does anyone have an old Anilam B5 they want to sell – or know of any dealers who might have one ?

I was hoping for a unit with the same fixing specification so I can use the same threaded holes to mount it . Thanks !

[stuart levensParticipant @stuartlevens88100]

[Chris Evans 6Participant @chrisevans6]

I have contact details in my workshop for a dealer in Walsall West Midlands, I will try and remember to look u for you tomorrow.

[David George 1Participant @davidgeorge1]

You can try Goodwin DRO engineers ( **LINK**&nbsp Ask for Daren.

David

[Author]

Posts