I'll give you £50, or alternatively you could look on Ebay at completed sales.That will give you the market price. You're probably looking at more like £2000

They have been listed on eBay at all sorts of prices but the average actual selling price is around £1000. Having a variable speed controller fitted may increase the value a bit.

I've seen one which seems to have sold for circa £2000. It had the full screw cutting gearbox plus the change wheels that are needed, 3 jaw, 4 jaw, face plate, centres and drill chuck and a qctp with some holders.

My immediate thought when I saw it was were was the fixed steady. This sort of thing is a bit of a problem with the newer boxford. Can't remember the actual price of a steady but it's £200 plus and few if any parts come up used.

I went and looked at a machine much like the one posted. Even chucks are more costly due to the price of camlock back plates. I also didn't realise that the screw cutting gearboxes varied. That one sold for well under £1000 eventually on ebay. It was in good condition – greased up which made it look a bit of a mess. It just came with a chuck, catch plate and a qctp without holders.

Another I looked at ex college appeared to have a fault. If screw cutting was engaged and a rather small amount of pressure applied to the saddle wheel the lead screw nut flew out. The parts break down doesn't seem to show any sort of interlock that would do this so the nut must have been badly worn. Could be down to it being forced in with complete disregard to the screw cutting indicator. Not sure what happened to this one. It was priced at around £1000. Couldn't run it so gave it a miss anyway. Fixing the nut would have been costly and next to no bits with it.

Don't know why I look really. Must be machine tool lust or pornography. One thing for sure is that I would have a lot more trouble completely dismantling one to get parts down to a manageable weights unlike the old style which is pretty easy to do.

John

–