West coast Boxford road trip

This topic has 12 replies, 5 voices, and was last updated 24 September 2017 at 16:01 by Yngvar F.

Viewing 13 posts - 1 through 13 (of 13 total)

Author

Posts
21 August 2017 at 21:55 #313277
Yngvar F
Participant
@yngvarf
T

Do I need another lathe? Not really.

One the same size as the one I've got? Not at all.

Anyway after (quite) a few beers tonight it seemed like a good idea and a few texts later I'm going on a roadtrip this weekend.

A rather sorry looking Boxford AUD will be my hobby for a while.

Anyway I thought a few roadtrip photos might be fun so see u saturday.

Edited By Yngvar F on 21/08/2017 21:56:18
Advert

21 August 2017 at 21:55 #18624
Yngvar F
Participant
@yngvarf
Do I need another lathe?
22 August 2017 at 00:38 #313289
Hopper
Participant
@hopper
Looks like a project. Have fun.
22 August 2017 at 07:24 #313299
Joseph Noci 1
Participant
@josephnoci1
I commented in my post on my Shaper refurb that I obtained a Boxford lathe when I was around 12 years old – It was also the AUD, complete on its original cabinet, with all the accessories, 3 and 4 jaw chucks, a vertical slide, Coolant pump, faceplate, etc. Fortunately it was in very good condition and a repaint made it look like new. Sold it in my early twenties Hindsight hurts sometimes – I do wish I still had that lathe!

It came from the Toolroom of a company my Dad did some work for – FMC-Link Belt Pty LTD – an American company, that pulled out of South Africa during the SA world Embargo era, and sold stuff for next to nothing. In my late Dad's legacy of papers and stuff I found the receipt of payment – R450.00 !! In the day the SA Rand to Bpound was 1:2 – Yes, 2 pounds for one SA Rand…17:1 today…

I am sure you will enjoy that Lathe!

Regards

Joe
25 August 2017 at 21:54 #313949
Yngvar F
Participant
@yngvarf
Tomorrow I will be going on a long tour to get the Boxford.

Today after work I went for a three hour round trip to pick up a "Flott" drill press. The ad said "a metre high, don't work". Didn't say weighs a ton.

Two strong men managed to get it into the car,

I had to take it apart inside the car to get it out and down to the workshop.

At £40 the price was right .
26 August 2017 at 01:21 #313962
Hopper
Participant
@hopper
Now that looks like a good solid drill press, well worth having if it's in good nick. Which it appears to be, judging from the lack of Swiss cheesing of the table.

Is that an auto downfeed knob on the top left of the spindle housing?
26 August 2017 at 06:00 #313969
Michael Gilligan
Participant
@michaelgilligan61133
Woke up early

Liked the look of the Flott, and found this: **LINK**

http://www.flott.de/en/flott/company/high-quality-made-in-germany

MichaelG.

.

Edit: … and this: http://www.lathes.co.uk/flott/

Edited By Michael Gilligan on 26/08/2017 06:06:01
26 August 2017 at 07:30 #313972
Yngvar F
Participant
@yngvarf
It does seem to be in good nick, just very dirty.

Everything came apart easily.

I was hoping for autofeed when I saw the big knob but I think it is for belt tension.
26 August 2017 at 09:22 #313983
Yngvar F
Participant
@yngvarf
First ferry, and the weather is Nice for once.
26 August 2017 at 18:53 #314079
Yngvar F
Participant
@yngvarf
Waiting for the last ferry. Then one moore hour of driving and I think I deserve a beer.

Lathe seems in ok shape. The guy had taken it apart but lost interest. Some rust on the stand, but the ways are covered in grease. It is complete exept maybe missing the suds pump.

Another back of the car photo
17 September 2017 at 15:25 #317391
Yngvar F
Participant
@yngvarf
First dry fit.

I'm no fan of painting but it was such a mess I ended up with a repaint.

After inventory it is missing both gibs,a few grub screws and the top slide dial.

The back gear is busted so buy cutters and make new gears or buy new gears.

The lathe has imperial leadscrew/gear box but with complete metric gear set..

Cross and top slide is metric.

The tailstock is imperial with metric markings on the barrel

Edited By Yngvar F on 17/09/2017 15:26:15
17 September 2017 at 15:29 #317392
Thor 🇳🇴
Participant
@thor
The lathe is looking nice Yngvar, you have done a good job. I am sure you'll get a nice lathe when you have sorted the remaining issues.

Thor
24 September 2017 at 16:01 #318407
Yngvar F
Participant
@yngvarf
Thank you.

I've made new gibs and micrometer dial.

Unfortunately the Divisionmaster let out the smoke when I was going to engrave the dial, and I do not have the 25 hole plate to do 125 division manually.

Ended up with 25 divisions for now.
Author

Posts