‘Myford’ suitable tools from India

Advert

New Replies

Report Bug

Help/FAQs

‘Myford’ suitable tools from India

This topic has 15 replies, 12 voices, and was last updated 7 October 2016 at 11:18 by mrbuilder.

Viewing 16 posts - 1 through 16 (of 16 total)

Author

Posts
28 September 2016 at 12:58 #258299
mrbuilder
Participant
@mrbuilder
Does anyone have first hand experience in regard to the quality of some of these tools for Myford lathes made in India? Such as this QCTP:

http://www.ebay.co.uk/itm/122152684068

Looks okay from the photos. Have also seen a whole bunch of other tools available from there.

On that note does anyone know where the current Myford QCTPs are made and the quality of those?

Have been reading a number of posts around the place on a number of alternative QCTP suppliers. Quite mixed thoughts.
Advert

28 September 2016 at 12:58 #18208
mrbuilder
Participant
@mrbuilder
Quality of tools made in India
28 September 2016 at 13:55 #258307
Neil Wyatt
Moderator
@neilwyatt
It may well fit your lathe, but some sellers just add 'Myford' to their listings to add value or get more views..

I'm sure somewhere on eBay there is an item: "Stuffed pigeon for sale. Suitable for Myford".

Neil
28 September 2016 at 14:09 #258311
MW
Participant
@mw27036
Or adding tag lines such as "well worth a look" Why not let me be the judge of that?

Michael W
28 September 2016 at 14:16 #258313
Nick_G
Participant
@nick_g
.

IMHO they are of mixed quality. Even from a supplier that has sold a good product the next batch may be questionable.

So you are sort of 'in the hands of the gods' ………… Which is not much of a useful statement to you is it.

Nick
28 September 2016 at 17:54 #258340
Bazyle
Participant
@bazyle
There are some other threads on the forum about toolposts. You will see that for the Dickson style there can be minor problems with getting extra toolholders from a different source, or even the same source a few years later. Not insurmountable but a nuisance.

The ones sold by Chronos for a Myford are the right size for a Myford – that is in terms of block and holder size.

MW agree about the "well worth a look" guy he really irritates me. I'd like to be able to search excluding Myford but then miss all the non-myford stuff.
28 September 2016 at 18:02 #258342
Roger Provins 2
Participant
@rogerprovins2
Posted by Bazyle on 28/09/2016 17:54:41:

……… You will see that for the Dickson style there can be minor problems with getting extra toolholders from a different source, or even the same source a few years later. Not insurmountable but a nuisance……

A problem I have with a fairly cheap Warco QCTP set bought a few years ago. They haven't had spare holders in stock for ages and doesn't look like the ever will.

Roger
28 September 2016 at 18:38 #258344
not done it yet
Participant
@notdoneityet
No idea of quality, but I would be asking if the tool-holding set screws are threaded to the end, or rather if the thread has been removed from the end of them. It looks to me as though they may need machining before use, but cannot be sure (the reason why I would be enquiring!). Or maybe they are hardened?
28 September 2016 at 19:37 #258357
alan-lloyd
Participant
@alan-lloyd
Have you considered the multifix toolpost system? well worth a look, got mine from Create.
28 September 2016 at 20:03 #258363
Lathejack
Participant
@lathejack
Posted by alan lloyd 3 on 28/09/2016 19:37:19:

…….. well worth a look,…….

Edited By Lathejack on 28/09/2016 20:11:15
28 September 2016 at 20:55 #258371
Ajohnw
Participant
@ajohnw51620
I bought some a while ago and found that branded myford ones were not that much more expensive than others in sets. Having been bitten a little in the past when they came from Taiwan I decided to get the real thing. The Taiwan ones were not too bad but I realised how much better the Myford ones were when I bought my Boxford. Only problem on that is the tool height they will hold. It came with rather a lot of holders so a change would work out rather expensive.

If Indian microscopes are anything to go buy I would avoid. Too many horror stories on a certain Microscope forum.

There also seems to have been a UK manufacturer producing them. Or was.

John

–

Edited By Ajohnw on 28/09/2016 20:56:20
28 September 2016 at 21:39 #258376
MW
Participant
@mw27036
Posted by Ajohnw on 28/09/2016 20:55:30:

If Indian microscopes are anything to go buy I would avoid. Too many horror stories on a certain Microscope forum.

John

India's a big place John, could be some good eggs out there?

Michael W
28 September 2016 at 22:34 #258382
DMB
Participant
@dmb
Many years ago I purchased a QCTP from Compass House Tools in Rotherfield, East Sussex. Still using it as it seems to be satisfactory. Couple of years ago thought I would like to get 2 or 3 more tool holders when they were @ Guildford but said that design was discontinued.
Bugger!
What a good job I had also purchased the better quality kit from the original Myfords while they were still in existence.
Taken out of the box, put back for future and carried on using the Compass House kit.
Will dig out the Myfords QCTP and tool holders and start using them soon.
So, beware buying cheap and twice!
29 September 2016 at 00:47 #258388
D Hanna
Participant
@dhanna35823
The Indian one is worth a try. I have one on an ML7 (with a Super 7 cross/top slide) and works well. The one I have is from a local OZ supplier :

https://www.machineryhouse.com.au/L280 Some years ago a couple of toolholders were reportedly too hard or had sharp corners in the tool recess which caused breakages. Maybe the user clamped the tool too hard???!!

The Indian one comes with 4 holders against only 2 for a Myford direct from Myford Ltd. On fleabay, the Myford is 124 Quid plus 23 Quid for ea extra tool holder.

The Indian one accepts a tool cutting edge height of max 3/8" on a Super 7 top slide. Not sure if it's the same on a standard 7 slide.

For home use on a small lathe you shouldn't have a problem as the quality of even Indian stuff has improved over the last few years……………… remember what we said about Japan in the years after WW2 and then China of recent years. Some is still junk and some quite good quality.
29 September 2016 at 04:27 #258394
mrbuilder
Participant
@mrbuilder
Posted by DMB on 28/09/2016 22:34:10:
What a good job I had also purchased the better quality kit from the original Myfords while they were still in existence.
So, beware buying cheap and twice!

I’d be interested if anyone know whether the current Myford QTCPs are as good quality as the previous.

Indeed I do usually try and keep that philosophy in regard to buying twice!

Posted by Michael Walters on 28/09/2016 14:09:18:

Or adding tag lines such as "well worth a look" Why not let me be the judge of that?

Michael W

Agree with the search strings that sellers put in. That’s a hilarious line. I once succumbed to that, and the lathe was definitely not worth a look – expensive and was in terrible condition.

Posted by alan lloyd 3 on 28/09/2016 19:37:19:

Have you considered the multifix toolpost system? well worth a look, got mine from Create.

I haven’t but looks like I should look into it. Thanks.
7 October 2016 at 11:18 #259715
mrbuilder
Participant
@mrbuilder
D Hanna. Thanks for the post – for some reason it wasn't sent to me! Indeed quite a price difference.

Myford are out of stock on their toolholders at the moment anyway.

Out of interest, found this when trawling through the net, anyone have any experience with this company "Myford Solutions" and it's tools? Not a lot of information on it but the unit looks similar.

**LINK**
Author

Posts