Denham Junior Mk2 toolpost

This topic has 1 reply, 1 voice, and was last updated 21 June 2019 at 20:53 by Roger Clark.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
21 June 2019 at 20:53 #415465
Roger Clark
Participant
@rogerclark
I'm looking for advice on choosing a Dickson type quick change tool post for my lathe. Problem is what size do I get as best fit and what info do I need to put here for you to advise me.

The Denham Junior Mk2 has a centre height of 5" from the flat, 4.5" from the top of the V. the holding bolt is .5" and is approx 45 mm from the centre of the bolt to the edge of the top slide and surface of topslide to centre of spindle is 14.87 mm.

My thoughts are a tool post that will overhang the edge of the topslide allowing me to drop the cutter holder below the level of the topslide although I expect an avalanche of 'don't/can't' do that!

Any ideas fellow machinists?

Edited By Rockingdodge on 21/06/2019 20:54:32
Advert

21 June 2019 at 20:53 #13569
Roger Clark
Participant
@rogerclark
To be precise a QCTP type.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Maisie
  Started by: ian Holdsworth in: Beginners questions
- 9
- 13
- 16 July 2026 at 21:56
  ian Holdsworth
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 11
- 16 July 2026 at 19:44
  old mart
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 27
- 16 July 2026 at 19:01
  SteveP
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 8
- 29
- 16 July 2026 at 18:55
  Wade Beatty
- Myford VMC Spindle Advice Please. 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 12
- 51
- 16 July 2026 at 17:14
  Graham Meek
- Bonding brass hubs to steel
  Started by: mikemunson in: Beginners questions
- 6
- 8
- 16 July 2026 at 17:09
  Diogenes
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 16
- 37
- 16 July 2026 at 15:41
  JasonB
- My Intro
  Started by: Martin Freestone in: Introduce Yourself – New members start here!
- 5
- 5
- 16 July 2026 at 12:57
  Russell Eberhardt
- Fixturing conundrum with Hemingway die filer kit
  Started by: timdotd in: Workshop Techniques
- 4
- 5
- 16 July 2026 at 12:32
  vintagengineer
- Comm Ads
  Started by: bernard towers in: Website Questions, Comments, and Suggestions
- 4
- 20
- 16 July 2026 at 12:14
  JasonB
- QCTP 1 2
  Started by: James A in: Workshop Tools and Tooling
- 20
- 35
- 16 July 2026 at 10:34
  John Haine
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 60
- 16 July 2026 at 07:21
  seemack
- Bending copper tube?
  Started by: Bo’sun in: Workshop Techniques
- 18
- 22
- 15 July 2026 at 23:29
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 42
- 146
- 15 July 2026 at 23:05
  Michael Gilligan
- Help please! Workshop clearance
  Started by: ksw in: General Questions
- 11
- 24
- 15 July 2026 at 22:23
  ksw
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 5
- 11
- 15 July 2026 at 18:15
  Nigel Graham 2
- Solar Panels 1 2
  Started by: Vic in: The Tea Room
- 17
- 45
- 15 July 2026 at 18:11
  An Other
- Band saw 1 2 3 4
  Started by: Peter Simpson 3 in: Beginners questions
- 25
- 81
- 15 July 2026 at 16:54
  ega
- Plug in Solar 1 2 3
  Started by: Vic in: The Tea Room
- 25
- 75
- 15 July 2026 at 12:34
  Robert Atkinson 2
- What is this? 1 2
  Started by: Sonic Escape in: General Questions
- 18
- 26
- 14 July 2026 at 19:52
  Andy Stopford
- Offen imperial bore mic gauge.
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 6
- 13
- 14 July 2026 at 19:30
  Graeme Seed
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD! 1 2
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 19
- 46
- 14 July 2026 at 17:40
  Neil A
- Lathe coolant applicators 1 2
  Started by: lucerne in: Manual machine tools
- 16
- 30
- 14 July 2026 at 09:15
  Julie Ann
- Small electromagnetic pump via E-Bay
  Started by: Clive Foster in: Manual machine tools
- 5
- 8
- 13 July 2026 at 20:02
  John Hinkley
- Windows 11 background pictures
  Started by: old mart in: The Tea Room
- 4
- 4
- 13 July 2026 at 19:49
  Mark Rand

Denham Junior Mk2 toolpost

Denham Junior Mk2 toolpost

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies