Connector Question

Connector Question

This topic has 4 replies, 3 voices, and was last updated 8 December 2022 at 11:31 by Nick Clarke 3.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
7 December 2022 at 18:39 #623947
Michael Gilligan
Participant
@michaelgilligan61133
This is rather embarrassing …

Does anyone recognise this little connector ?

There is a ferrite cylinder towards the other end of the lead, then an ordinary Type_A USB plug … but I simply can’t remember what this end plugs into

.

.

.

MichaelG.
Advert

7 December 2022 at 18:39 #32302
Michael Gilligan
Participant
@michaelgilligan61133
7 December 2022 at 19:29 #623954
DC31k
Participant
@dc31k
Tentative suggestion:

Uniden BCD396XT non-standard “USB” cable and a source of connectors.
7 December 2022 at 19:43 #623958
Michael Gilligan
Participant
@michaelgilligan61133
That does look remarkably similar … Thank you

I have had quite an assortment of cameras and GPS units over the years, so I will put it safely to one side for now.

MichaelG.
8 December 2022 at 11:31 #624032
Nick Clarke 3
Participant
@nickclarke3
It looks like a small firewire connector
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- How Good Are 3D Printers?
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 4
- 4
- 14 June 2026 at 22:44
  Mark Rand
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 66
- 14 June 2026 at 21:29
  Julie Ann
- Running 380V 3-phase motor on 230V 1-phase
  Started by: jimalm in: Electronics in the Workshop
- 13
- 25
- 14 June 2026 at 21:24
  Julie Ann
- Taper Identification
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 2
- 2
- 14 June 2026 at 20:46
  Chris Crew
- Lathe cutting aggressive taper
  Started by: Lee Kennedy in: Manual machine tools
- 7
- 8
- 14 June 2026 at 12:22
  Dave Halford
- Lightning 1 2 3
  Started by: duncan webster 1 in: Electronics in the Workshop
- 14
- 51
- 14 June 2026 at 11:07
  Robert Atkinson 2
- Testing Single Point Thread Fitment
  Started by: berwick in: Beginners questions
- 12
- 16
- 14 June 2026 at 10:18
  alecs
- Axle pin question – choice of material and possible need for case hardening?
  Started by: barryblundell in: Materials
- 4
- 4
- 14 June 2026 at 09:21
  Russell Eberhardt
- Wallace valvegear simulator
  Started by: Kevan Shaw in: General Questions
- 7
- 23
- 13 June 2026 at 18:43
  John Purdy
- Taylor Hobson Pantograph Engraver Model D 1 2
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 8
- 30
- 13 June 2026 at 17:56
  jaCK Hobson
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 34
- 115
- 13 June 2026 at 15:38
  Dalboy
- Hindu ascetic in picture gallery
  Started by: Bill Phinn in: Website Questions, Comments, and Suggestions
- 3
- 3
- 13 June 2026 at 15:37
  Neil Wyatt
- Bridgeport Milling Machine feed control module
  Started by: Mark Willis in: Workshop Tools and Tooling
- 13
- 25
- 13 June 2026 at 13:08
  henrik83
- international exhibition 1862
  Started by: duncan webster 1 in: The Tea Room
- 9
- 13
- 13 June 2026 at 11:41
  gerry madden
- Air Duster
  Started by: jaCK Hobson in: Workshop Tools and Tooling
- 4
- 5
- 13 June 2026 at 10:00
  jaCK Hobson
- Bridgeport Series 1 CNC 1 2
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 50
- 13 June 2026 at 08:43
  Les Riley
- Gauge Glass Fitting
  Started by: Thomas Clarke in: General Questions
- 10
- 14
- 13 June 2026 at 08:33
  Luker
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 6
- 7
- 13 June 2026 at 08:22
  DC31k
- Myford VMC Spindle Advice Please. 1 2
  Started by: Nigel Graham 2 in: Manual machine tools
- 10
- 30
- 12 June 2026 at 23:11
  Nigel Graham 2
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 226
- 12 June 2026 at 21:50
  Mark Rand
- Clockmaking starter project?
  Started by: Gman in: Clocks and Scientific Instruments
- 10
- 19
- 12 June 2026 at 20:21
  iacooper
- 3 1/2″ Gauge Discussion Group 1 2 3
  Started by: Neil Wyatt in: General Questions
- 37
- 70
- 12 June 2026 at 17:16
  Paul McDonough
- Boxford CUD cabinet screw sizes and threads
  Started by: lucerne in: Manual machine tools
- 7
- 10
- 12 June 2026 at 17:15
  lucerne
- Replacement Allbrit Draftmaster Protractor Rulers
  Started by: wigan2026 in: Workshop Tools and Tooling
- 7
- 12
- 12 June 2026 at 16:20
  Dusty
- ML7 help please!
  Started by: myfordmikeml7 in: General Questions
- 7
- 8
- 12 June 2026 at 11:22
  myfordmikeml7

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies