Safety

This topic has 1 reply, 1 voice, and was last updated 16 July 2011 at 15:16 by Cyril Bonnett.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
16 July 2011 at 15:16 #71920
Cyril Bonnett
Participant
@cyrilbonnett24790
Think of climbing onto youe roof, from a solar panel installation site.I think this sums it up, be careful.

Important disclaimer
It is possible to hurt your self. You can cut, burn, choke, poison, or scald yourself messing about with this. You could also fall from the roof or fall down the ladder with a cable around your neck on to a wooden stake. You could electrocute your self ( with power tools ). Blow lamps can explode and solder flux can give you dermatitis. You could get tetanus or blood poisoning from a splinter or paper cut. You could have an accident on the way to B&Q in the car. So if you follow these instructions its at your own risk. Wear goggles, steel toe cap boots, thick leather gloves, a face mask and hard hat at all times. Use an RCD and proper scaffolding . Never work outside in a thunder storm. Anything you do is your own fault, it’s not my fault. I am not your mum. Good Luck see you in the next life.
Advert

16 July 2011 at 15:16 #5587
Cyril Bonnett
Participant
@cyrilbonnett24790
A disclaimer
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 15
- 32
- 5 July 2026 at 17:44
  Robert Atkinson 2
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 9
- 5 July 2026 at 16:52
  ega
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Accolade
  Started by: Bill Dawes in: General Questions
- 6
- 6
- 5 July 2026 at 13:26
  Philip Rowe
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 32
- 56
- 5 July 2026 at 13:15
  southernchap
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 9
- 10
- 5 July 2026 at 12:57
  Martin Johnson 1
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 118
- 4 July 2026 at 13:27
  JasonB
- upgrade of Alibre Atom 3D
  Started by: David George 1 in: CAD – Technical drawing & design
- 6
- 9
- 3 July 2026 at 22:23
  Mark Rand
- Unwanted Car Software Update
  Started by: Chris Crew in: The Tea Room
- 16
- 23
- 3 July 2026 at 22:12
  Chris Crew
- Leadscrew Handwheel for Warco WM180
  Started by: James A in: Manual machine tools
- 9
- 17
- 3 July 2026 at 20:45
  Andy Stopford
- Clarkson radius grinding attachment
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 5
- 10
- 3 July 2026 at 19:28
  Clive Foster
- Gas Tap Valves. Vintage 1 2 3 4
  Started by: dee in: Related Hobbies including Vehicle Restoration
- 22
- 88
- 3 July 2026 at 18:36
  duncan webster 1
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 65
- 3 July 2026 at 17:20
  vintagengineer
- Coventry Diehead CH Reassembly
  Started by: Tony Ray in: Workshop Tools and Tooling
- 3
- 8
- 3 July 2026 at 10:54
  bernard towers
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 58
- 2 July 2026 at 22:45
  dean clarke 2
- Running 380V 3-phase motor on 230V 1-phase 1 2 3 4
  Started by: jimalm in: Electronics in the Workshop
- 20
- 85
- 2 July 2026 at 22:38
  Vic
- Lathework for Beginners 1 2 … 4 5
  Started by: Neil Wyatt in: Manual machine tools
- 24
- 111
- 2 July 2026 at 17:36
  Howard Lewis

Safety

Safety

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies