Yes, great little grinder. Used to take 40 thou cuts on cast iron using a silicon carbide wheel. Don' t oil the slide ways, I think they get covered in grit and turn to paste.

Hi John,

It`s a nice simple grinder by Edgewick (Alfred Herbert) designed primarily for grinding chasers for the Herbert die holders and now very useful for model makers. Bet you that the X axis is worn to resemble a banana.

The interesting thing is the plate in the middle photo in which we can see that the grinder was not made by Herbert`s themselves but by another unknown company.

Enjoy it,

Alan

I made an offer to the works manager for one of these when it was removed from our labs and replaced with a larger surface grinder. I thought it would be a good fit for the workshop I was planning and I'd done a fair number of 'foreigners' on it The Works manegar said that he thought £75 was about right. Three months later I got an invoice from the company for £75+VAT=£88.13 for a Jones&shipman 1400 24"x8" grinder with a failed motor on the hydraulic pump unit. We'd been talking about different grinders . I re-designed the workshop to fit.

Be that as it may, the best solution would be to check the ways with a known camel back straight edge and re-scrape them flat. after that, the chuck can be ground on the grinder itself.

Where are you located? might be able to lend you the kit.

Hi all, the Herbert Junior is indeed a fine machine, I used them a lot during my time working on a tooling crib ( read shop floor tool refurbishing section ), a universal swivelling vice is a major asset, enabling me to service the Sandvik block tools, a large industrial TC version of the tangential tooling favoured by model engineers, fitted with a 6 inch diameter by one eighth inch thick diamond wheel it covered all that type of work ie grind down to remove any damage then return chip breakers to original form, widely used to refurbish Herbert roller box tools with shaped green grit wheels of course & with white aluminium oxide wheels to service both flat & circular cutters for threading die heads. By manually dressing the green grit wheels it is easy to create external radius tools & one off form tools thus circumventing the the 6 mile long queue to get anything done in the toolroom. One may find oneself diverted to sharpening blades for horse clippers, you have to see how much they charge for that! & likewise blades out of garden shredders. I have only one issue with the posted pictures, as you can see original colour of the machine was a dark navy blue & has been overpainted with a yardbrush in a bilious shade of green called I believe Eau de Nil, favourite colour of the shop manager, how I hate that colour, everything that moved or stood still was that colour. Dont forget though that no matter how much you learn about tool grinding there are always doubters, only a few weeks before I retired ( yesss ) I was asked by a man who polished a chair with his backside for a living if I knew how to grind a parting off tool, I could see he was impressed by one so old having such a powerful command of industrial language!

Cheers

Dear all,

I have also just acquired a Herbert Junior grinder. It is covered in gloopy white paint including all the operating wheels/levers (why paint that lovely chromed table lever?) and a significant quantity of grey gunge (?grinding dust and oil) but seems in passable condition. Readjusting the table jibs seems to reduce the table hight variation to 1 thou on table movement. But there is nowhere to properly mount a magnetic base for the indicator (yet), so that may or may not be true. I think I could extend the table movement beyond the standard 8 inch by extending the rack on its left hand side as the grinding wheel is still 3 inch from the end of the table when the rack runs out, whereas one inch from the right at full travel.

I am trying to find a manual: all I can find is the promotion literature on the lathes.co.uk website. The motor is wired for 440v so is going to have to come out to change to delta as my VFD only outputs 310v. I have a more powerful (3/4) hp and physically smaller single phase flange-mount motor from a forecourt petrol pump I could fit but it has ventilation holes -would that be a problem with grinding dust? My hood over the grinding wheel has an airscavenging fitting but no air pump so the dumpy Hoover may be pressed into action eventually for dust collection duties.

I would welcome any comments or advice. I live in Preston, Lancashire. Other kit in my garage includes a Heavy 10 Southbend and a Zay45 clone mill in quite good nick, squashed around a 1936 Alvis car and model steam engines.

Stephen Laurence.

Hello, Plus one to "Also acquired one" . Mine still has the original smaller cast wheel guard/shield, larger mag chuck, but whilst having the original switch gear has a single phase open/ventilated body, so obviously the dust not an issue?

I also need some wheels and was going to try Midland Abrasives? So also looking at how to change a wheel?

I also have a IDP ( Impregnated Diamond Products) bench surface grinder, which needs some restoration, but cannot find any details of these machines?

Peter

Hi all,

I'm clearing my dad's workshop and he has one of these machines. I'd be very grateful if any of you could give me an idea of a price I should ask for when I advertise it. I don't have any good photos yet but I think its a dark grey colour. Hope you can help.

Alison