Ml 7 Bearings

This topic has 3 replies, 3 voices, and was last updated 4 July 2016 at 16:11 by Howard Lewis.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
4 July 2016 at 14:02 #245389
Martin Brown 6
Participant
@martinbrown6
Hi to you all I am new to this site.my question is I have to look at the main Bering the one near the chuck it has a small amount of up and down play in it has any one got any advice to sorting it out.

Thanks martin
Advert

4 July 2016 at 14:02 #24626
Martin Brown 6
Participant
@martinbrown6
Myford ML7
4 July 2016 at 16:10 #245403
Ajohnw
Participant
@ajohnw51620
Assuming it's a plain bearing ML7 remove some shim from under the bearing cap and then scrape the bearing back in. If no shims left you need new bearings.

If it has the Super 7 cone bearing they can be adjusted but may need scraping. I posted a lot on adjustment on the Yahoo myford group site some time ago. I think you will find various bits and pieces in their file section.

John

–
4 July 2016 at 16:11 #245404
Howard Lewis
Participant
@howardlewis46836
Between the Cap and the Headstock you should find a shim pack on each side.

If you measure the Up and Down movement, this should tell you how much to peel off the each of the laminated shims. (It ought to be the same for each pack)

Hopefully , this should solve your problem

Howard
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Basic(?) Milling question
  Started by: paulmichael1084 in: Beginners questions
- 4
- 5
- 28 July 2026 at 00:36
  Pete
- Garden water pump
  Started by: John MC in: The Tea Room
- 12
- 21
- 28 July 2026 at 00:21
  Nigel Graham 2
- It’s A Compressor, Jim, But Not… 1 2
  Started by: Nigel Graham 2 in: General Questions
- 14
- 42
- 27 July 2026 at 23:58
  Nigel Graham 2
- blackgates eng 1 2
  Started by: Peter Daw in: Beginners questions
- 21
- 35
- 27 July 2026 at 23:41
  Nigel Graham 2
- Sealed Lead-Acid Battery
  Started by: Michael Gilligan in: Electronics in the Workshop
- 2
- 2
- 27 July 2026 at 23:37
  duncan webster 1
- Silver Soldering
  Started by: Jss in: General Questions
- 11
- 18
- 27 July 2026 at 23:36
  duncan webster 1
- Boiler explosion on Guadeloupe.
  Started by: howardb in: The Tea Room
- 5
- 7
- 27 July 2026 at 22:59
  howardb
- Is anyone interested in developping a new series of model engines? 1 2 3 4
  Started by: paulmichael1084 in: General Questions
- 20
- 88
- 27 July 2026 at 21:59
  paulmichael1084
- Bengs kits
  Started by: paul1956 in: Beginners questions
- 5
- 8
- 27 July 2026 at 17:37
  duncan webster 1
- New motor for a Myford super 7
  Started by: Hollowpoint in: Electronics in the Workshop
- 12
- 16
- 27 July 2026 at 17:29
  john fletcher 1
- Latest new addon for FreeCAD!!
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 2
- 4
- 27 July 2026 at 16:15
  Speedy Builder5
- All things Beaver Mill 1 2 … 9 10
  Started by: Robert James 3 in: Manual machine tools
- 43
- 233
- 27 July 2026 at 16:15
  Andrew Skinner
- chester conquest pcb board connections
  Started by: In Wilson in: Introduce Yourself – New members start here!
- 6
- 15
- 27 July 2026 at 13:35
  Hugh Stewart-Smith 1
- Peat-Shaped [ ref. Verdict DTI ]
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 1
- 1
- 27 July 2026 at 12:40
  Michael Gilligan
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 28
- 94
- 27 July 2026 at 09:27
  not done it yet
- Super Simplex Build
  Started by: Peter Hoerlein in: Work In Progress and completed items
- 7
- 19
- 27 July 2026 at 06:29
  Peter Hoerlein
- Hobbing a Brass or Aluminium Drive Pulley to Stop Belt Slippage
  Started by: Blue Heeler in: Hints And Tips for model engineers
- 7
- 15
- 27 July 2026 at 00:45
  Blue Heeler
- Long awaited FreeCAD version 1.1 released
  Started by: Russell Eberhardt in: CAD – Technical drawing & design
- 3
- 9
- 26 July 2026 at 15:36
  Russell Eberhardt
- Looking for detailed build logs to help decide next project
  Started by: GrahamS in: Stationary engines
- 4
- 8
- 26 July 2026 at 10:57
  GrahamS
- Deep drilling
  Started by: Speedy Builder5 in: Workshop Techniques
- 12
- 25
- 26 July 2026 at 07:58
  Dalboy
- Buzz Ballz packaging “unrecyclable” in U.K.
  Started by: Michael Gilligan in: The Tea Room
- 6
- 6
- 25 July 2026 at 23:16
  Bazyle
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 325
- 25 July 2026 at 19:23
  Phil Whitley
- Mysterious Morse Tapers
  Started by: Pippin in: Workshop Tools and Tooling
- 10
- 18
- 25 July 2026 at 17:12
  Pippin
- REXON SS16A scroll saw
  Started by: Michael Gilligan in: Workshop Tools and Tooling
- 3
- 7
- 24 July 2026 at 22:32
  Michael Gilligan
- Posts by new member containing ads.
  Started by: alecs in: Website Questions, Comments, and Suggestions
- 5
- 9
- 24 July 2026 at 20:22
  bernard towers

Ml 7 Bearings

Ml 7 Bearings

Latest Replies

Latest Issue

August 2026

Newsletter Sign-up

Latest Replies