college engineering

This topic has 14 replies, 12 voices, and was last updated 28 June 2016 at 21:57 by Jon.

Viewing 15 posts - 1 through 15 (of 15 total)

Author

Posts
28 June 2016 at 07:53 #244408
mick70
Participant
@mick70
just tried going onto gollege engineering but nothing there.

anyone know whats happened to them?

cheers
Advert

28 June 2016 at 07:53 #24608
mick70
Participant
@mick70
28 June 2016 at 07:58 #244410
JasonB
Moderator
@jasonb
Just come up OK for me, whats happened to you?

There new look site has been up for about a month now.
28 June 2016 at 08:01 #244411
Brian Oldford
Participant
@brianoldford70365
"just tried going onto gollege engineering but nothing there.

anyone know whats happened to them?"

If you searched for them with that spelling I'm not surprised you didn't find them.
28 June 2016 at 08:06 #244412
mick70
Participant
@mick70
i used the bookmarked link i have.

just searched for it and got new page up didn't realise they had new page.

not been oon it for fair while.
28 June 2016 at 08:43 #244415
Neil Wyatt
Moderator
@neilwyatt
It's a new owner, I chatted with them at Doncaster. They seem very keen to support teh hobby and were clearly enjoying the show.

Neil
28 June 2016 at 09:50 #244424
V8Eng
Participant
@v8eng
I was looking at their site earlier, so here is a link to it.

**LINK**

Hope it helps.

Edited By V8Eng on 28/06/2016 09:51:38
28 June 2016 at 10:13 #244426
Rainbows
Participant
@rainbows
On a slight tangent does anyone know where the prices are on the new website? I was checking the casting section and found nothing to do with price or adding it to the basket.
28 June 2016 at 10:25 #244427
Michael Gilligan
Participant
@michaelgilligan61133
Posted by Rainbows on 28/06/2016 10:13:38:

On a slight tangent does anyone know where the prices are on the new website? I was checking the casting section and found nothing to do with price or adding it to the basket.

.

It looks like this might be 'a work in progress'

… There are prices for Brass Angle, but not for Iron Castings for Angle Plates

MichaelG.
28 June 2016 at 10:30 #244428
KWIL
Participant
@kwil
Norton blocks the new site as dangerous! Must be because you end up spending money
28 June 2016 at 11:24 #244443
mechman48
Participant
@mechman48
Accessed via V8Eng; a lot of prices are displayed but only on the round/square/flat stock/angle etc. It seems that it's only the castings that are unpriced.

George.
28 June 2016 at 11:41 #244449
Brian Wood
Participant
@brianwood45127
That's interesting KWIL, I have Norton protection too and there wasn't a murmur when I took a look just now.

Regards Brian
28 June 2016 at 11:42 #244451
JasonB
Moderator
@jasonb
Posted by KWIL on 28/06/2016 10:30:30:

Norton blocks the new site as dangerous! Must be because you end up spending money

They are just blocking you as you moaned about their CI prices
28 June 2016 at 12:42 #244461
Engine Builder
Participant
@enginebuilder
I recently placed an order from their web site but was told the item was out of stock. No problem getting a refund but it might be good idea to check the stock before pacing an order.
28 June 2016 at 21:57 #244564
Jon
Participant
@jon
I would do some shopping around first might save 1/3 on their prices.

1" aluminium round 3ft £40.04 delivered I would want a 3M length for that used to pay £28.
1" aluminium round 900mm (15mm shorter) delivered £13.74 first one checked on ebay.
Author

Posts