RDG 250VSL Lathe

RDG 250VSL Lathe

This topic has 2 replies, 2 voices, and was last updated 13 January 2015 at 16:53 by JasonB.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
13 January 2015 at 16:13 #23669
David Little
Participant
@davidlittle91143
Advert

13 January 2015 at 16:13 #175899
David Little
Participant
@davidlittle91143
Can anyone help? I am in th process of buying a second hand lathe RDG 250VSL I understand that these are very similar to the WARCO and CHESTER lathes. Are any other parts interchangeable? Ie sliding steady, four jaw chuck etc, I have contacted Chester and WARCO but they are not familiar with the lathe. If anyone has had any experience of these lathes any information would help.

Thanks Dave
13 January 2015 at 16:53 #175901
JasonB
Moderator
@jasonb
Yes they are basically the same design as the WM250 and DB10 of the time so the steadies would fit, not sure if Warco and Chester list them as sepparate items as they usually supply with the basic lathe. Have a look at Amadeal and Toolco who sell these parts as extras for some of their machines. I think RDG only did them for a short time just before they bought up Myford.

Chuckmounting may be slightly different but as you would have to machine a backplate anyway it should not be a problem to measure the flange fixing and make the backplate to suit. I'd go upto a 160mm 4-jaw chuck.

J

Edited By JasonB on 13/01/2015 17:10:57
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Honing cylinder
  Started by: Speedy Builder5 in: Workshop Techniques
- 4
- 6
- 19 July 2026 at 06:51
  JasonB
- Mechanical lubrication steam locos. Non return valve opening pressure
  Started by: peter allen 1 in: General Questions
- 2
- 2
- 19 July 2026 at 05:59
  Speedy Builder5
- Bridgeport Series 1 CNC 1 2 3
  Started by: tomcnc in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 62
- 19 July 2026 at 02:22
  seemack
- Interactive article on Beam Engines
  Started by: glinscott in: Stationary engines
- 3
- 7
- 18 July 2026 at 23:52
  glinscott
- Face Drive Pins
  Started by: Michael Gilligan in: Materials
- 3
- 4
- 18 July 2026 at 22:40
  ega
- Steam Loco component interconnection diagram
  Started by: Trevor Wood 6 in: Beginners questions
- 2
- 2
- 18 July 2026 at 22:22
  noel shelley
- New comer
  Started by: vgvikram171 in: Introduce Yourself – New members start here!
- 1
- 1
- 18 July 2026 at 20:43
  vgvikram171
- Fixturing conundrum with Hemingway die filer kit
  Started by: timdotd in: Workshop Techniques
- 6
- 11
- 18 July 2026 at 18:52
  timdotd
- Use of insert type lathe tools 1 2
  Started by: JA in: Workshop Tools and Tooling
- 16
- 27
- 18 July 2026 at 18:39
  JA
- Help ID’ing Round Carbide Insert and Finding a Supplier 1 2
  Started by: Jon Gibbs in: Workshop Tools and Tooling
- 10
- 36
- 18 July 2026 at 18:07
  renardiere7
- Plug in Solar 1 2 3 4
  Started by: Vic in: The Tea Room
- 26
- 81
- 18 July 2026 at 17:03
  Macolm
- Smart & Brown model A spindle lock
  Started by: old mart in: Workshop Tools and Tooling
- 2
- 12
- 18 July 2026 at 16:56
  Steve101
- Links for Workshop and Model Engineering STLs and other files.
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 10
- 14
- 18 July 2026 at 16:29
  Mark Rand
- Pipe Size Puzzle.
  Started by: Nigel Graham 2 in: Locomotives
- 6
- 12
- 18 July 2026 at 14:52
  Zan
- Nut screws washer and bolts – you know the old joke
  Started by: Kiwi Bloke in: General Questions
- 13
- 19
- 18 July 2026 at 14:47
  duncan webster 1
- Myford VMC Spindle Advice Please. 1 2 3
  Started by: Nigel Graham 2 in: Manual machine tools
- 12
- 59
- 18 July 2026 at 11:59
  Graham Meek
- Small 3D Metal Printed Part
  Started by: Julie Ann in: 3D Printers and 3D Printing
- 1
- 1
- 18 July 2026 at 11:43
  Julie Ann
- Help please! Workshop clearance 1 2
  Started by: ksw in: General Questions
- 12
- 26
- 18 July 2026 at 10:34
  bernard towers
- QCTP 1 2
  Started by: James A in: Workshop Tools and Tooling
- 20
- 36
- 18 July 2026 at 09:12
  James A
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 30
- 17 July 2026 at 21:58
  SteveP
- Very Low Q
  Started by: duncan webster 1 in: Clocks and Scientific Instruments
- 2
- 2
- 17 July 2026 at 18:39
  John Haine
- How Good Are 3D Printers? 1 2
  Started by: Neil Wyatt in: 3D Printers and 3D Printing
- 19
- 43
- 17 July 2026 at 17:17
  Roderick Jenkins
- My adventures with a bench top CNC mill 1 2 3
  Started by: John Hinkley in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 8
- 70
- 17 July 2026 at 16:13
  JasonB
- Maisie
  Started by: ian Holdsworth in: Beginners questions
- 10
- 14
- 17 July 2026 at 12:48
  KenL
- My Intro
  Started by: Martin Freestone in: Introduce Yourself – New members start here!
- 6
- 6
- 17 July 2026 at 11:42
  Howard Lewis

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

July 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies