Boiler for Bolton triple engine

Boiler for Bolton triple engine

Home › Forums › General Questions › Boiler for Bolton triple engine

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #164703
    Tony Martyr
    Participant
      @tonymartyr14488

      I've just completed a Bolton design triple expansion engine. The valve timing of which is a bit of a pain – "if I ever made another I would do things differently etc"

      As I thought I can't get it to run on compressed air, probably due to the very early cut-off required on the HP cylinder so I'm about to build the boiler and ancillaries system. To save some time I'm considering buying a Blackgates boiler kit but can't find an image of one on line. I could build a 4.5 or 5 inch dia vertical fire tube unit that would provide saturated steam at about 50 psi but I would like to hear from anyone who has steam run this or similar triples before I start

      suggestions most welcome

      Tony

      #23512
      Tony Martyr
      Participant
        @tonymartyr14488
        #165265
        nigel jones 5
        Participant
          @nigeljones5

          Ive built many a vertical boiler…what is the size and sweep of the first cylinder?

        Viewing 3 posts - 1 through 3 (of 3 total)
        • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

        Latest Replies

        Home › Forums › General Questions › Topics

        Viewing 25 topics - 1 through 25 (of 25 total)
        Viewing 25 topics - 1 through 25 (of 25 total)

        View full reply list.