Warco WM14 dimension

This topic has 2 replies, 2 voices, and was last updated 18 January 2014 at 13:57 by Christopher Taylor 1.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
18 January 2014 at 10:12 #141001
Eric Cox
Participant
@ericcox50497
Can anyone with a Warco WM14 milling machine give the dimension from the base of the machine to the top of the table.
Advert

18 January 2014 at 10:12 #23081
Eric Cox
Participant
@ericcox50497
18 January 2014 at 13:57 #141020
Christopher Taylor 1
Participant
@christophertaylor1
Hi Eric

I have a WM14 and the measurement from the base to the top of the table on my model is 142mm.

Chris
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Advert

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Flat Surface 1 2 3
  Started by: COLIN MARTIN 2 in: Materials
- 33
- 63
- 6 July 2026 at 18:08
  Howard Lewis
- When is a new 90 degree drill not 90 degrees?
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 2
- 3
- 6 July 2026 at 17:41
  Bill Phinn
- 1930 Austin 12 with 3rd brush dynamo
  Started by: john fletcher 1 in: General Questions
- 8
- 8
- 6 July 2026 at 17:38
  Howard Lewis
- Hi there fellow engineers
  Started by: ray1580 in: Introduce Yourself – New members start here!
- 6
- 9
- 6 July 2026 at 17:19
  Howard Lewis
- Hallo from Austria
  Started by: wilfried54 in: Introduce Yourself – New members start here!
- 4
- 5
- 6 July 2026 at 17:16
  Howard Lewis
- Jaxon Steam Car ride to the next 5 inch rail club
  Started by: Werner Schleidt in: Traction engines
- 4
- 5
- 6 July 2026 at 17:11
  Werner Schleidt
- Unwanted Car Software Update 1 2
  Started by: Chris Crew in: The Tea Room
- 19
- 29
- 6 July 2026 at 16:26
  Bill Phinn
- Valuatiion of severql models
  Started by: ron vale 3 in: Stationary engines
- 2
- 2
- 6 July 2026 at 13:56
  bernard towers
- Flywheel material
  Started by: Speedy Builder5 in: Materials
- 4
- 5
- 6 July 2026 at 13:28
  John Haine
- Myford Ml7 Technical Drawings 1 2 3
  Started by: Harry Broadbent in: Model Engineer & Workshop
- 28
- 69
- 6 July 2026 at 13:09
  alecs
- Lathe coolant applicators
  Started by: lucerne in: Manual machine tools
- 12
- 14
- 6 July 2026 at 12:44
  Martin Johnson 1
- 24cc DIESEL ENGINE FROM SOLID 1 2 3
  Started by: dean clarke 2 in: I/C Engines
- 13
- 60
- 6 July 2026 at 08:29
  alecs
- Accolade
  Started by: Bill Dawes in: General Questions
- 8
- 8
- 6 July 2026 at 00:18
  Nigel Graham 2
- What Did You Do Today 2026 1 2 … 4 5
  Started by: JasonB in: The Tea Room
- 36
- 119
- 6 July 2026 at 00:13
  Nigel Graham 2
- Laser centre finder 1 2
  Started by: Buffer in: General Questions
- 16
- 33
- 5 July 2026 at 21:54
  Vic
- Brass covered steel
  Started by: Dougie Swan in: General Questions
- 9
- 10
- 5 July 2026 at 20:43
  Dougie Swan
- Testing Single Point Thread Fitment 1 2
  Started by: berwick in: Beginners questions
- 17
- 30
- 5 July 2026 at 16:44
  Michael Gilligan
- My Minnie 1 2
  Started by: Nick Welburn in: Work In Progress and completed items
- 8
- 41
- 5 July 2026 at 15:45
  Nick Welburn
- Optimum products? 1 2 3
  Started by: Alan Ambrose in: Manual machine tools
- 24
- 51
- 5 July 2026 at 13:22
  southernchap
- An arduino enigma
  Started by: duncan webster 1 in: Electronics in the Workshop
- 8
- 18
- 5 July 2026 at 10:29
  John Haine
- Easy as Pi
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 5
- 9
- 5 July 2026 at 10:06
  michael m
- Identifying the pitch of threading inserts
  Started by: Bill Phinn in: Workshop Tools and Tooling
- 5
- 12
- 4 July 2026 at 20:19
  Bill Phinn
- My week this week! My workshop videos 1 2 … 12 13
  Started by: Phil Whitley in: The Tea Room
- 16
- 324
- 4 July 2026 at 16:46
  Phil Whitley
- NPT thread
  Started by: Bill Dawes in: General Questions
- 8
- 11
- 4 July 2026 at 15:46
  Dave Halford
- New project for 2025 1 2
  Started by: SteveP in: I/C Engines
- 8
- 26
- 4 July 2026 at 15:12
  SteveP

Warco WM14 dimension

Warco WM14 dimension

Latest Replies

Latest Issue

July 2026

Newsletter Sign-up

Latest Replies