Screw Suppliers

[Phil PParticipant @philp]

During the course of the last year I bought a packet of M1.2 Round Head Brass Screws approx 10 or 12mm long (they only need to be about 3mm long) to hold the cladding panels on my model mill engine. I have one screw left in stock so thought I would buy some more.

The problem is I have hunted every supplier I can think of to obtain these and nobody seems to do them. If I had not already had some I would assume they were not made, but I know they are.

Before I go completely mad can anyone on hear give me a clue where I might have bought them from. None of the suppliers at Doncaster show had any ideas either.

Thanks

Phil

[Phil PParticipant @philp]

M1.2 Round Head Brass Screws

[charadamParticipant @charadam]

These any good?

http://www.conrad-electronic.co.uk/ce/en/product/248767/Sol-Expert-M12-10-Brass-screws-metric-set-of-25

[Dave DanielsParticipant @davedaniels93256]

When I was at work we used these folk.

http://www.pts-uk.com/

NOT brass though. All S.S. I think.

They also had odd stuff not listed on site so just ask.

D.

[Steve CrowParticipant @stevecrow46066]

Cornwall Model Boats do dome head and hex head down to 1mm. Their 1.2mm hex comes in 6 different lengths. The dome ones are brass, 12mm long. All about 10p each.

Steve

[not done it yetParticipant @notdoneityet]

Did you find these?

http://www.modellingtimbers.co.uk/24.html

http://www.modelenginemaker.com/index.php?topic=628.0

[pgk pgkParticipant @pgkpgk17461]

google also finds these: **LINK**

[Author]

Posts