Pinnacle PCD 20 mill

[john fletcher 1Participant @johnfletcher1]

Scarborough Mens (Mates) Shed. We are still on the lookout for an operator manual for this machine, or, as they were marketed under different names by different suppliers in 1970/80 any make will be OK. Also, has some made an attachment to prevent the head from moving around (about) column when lowering or raising the head, I'm sure some has, folk were ingenious those days. There is a kit on ebay for the small diameter column, ours is 115mm in diameter. Perhaps there is some one out there who is the owner or was an owner of one of these machine who would communicate with me, initially via a PM. John

[john fletcher 1Participant @johnfletcher1]

[DiogenesIIParticipant @diogenesii]

Is it the same as the 'Grizzly' badged one in this pdf?

https://cdn0.grizzly.com/manuals/g0705_m.pdf

[john fletcher 1Participant @johnfletcher1]

To DiogenesII many thanks from my Mens (Mates) Club friends just what we have been looking for,. we have some novices and i /we want get them on the right foot straight away. John

[DiogenesIIParticipant @diogenesii]

[Author]

Posts