Joint Round Edge Needle Files

[Mark RandParticipant @markrand96270]

Get thee behind me Ketan…

A 250mm lathe file and 300mm No 3 and 4 cut finishing files would be nice though.

[JasonBModerator @jasonb]

Mark, Ketan already stocks the lathe file and the No3 finishing file. Show him the colour of your money

[Mark RandParticipant @markrand96270]

Well bugger me sideways! That's another trip to Syston next week…

 

Wait a minute. I've just been had! Ketan's separating me from my money again.

Edited By Mark Rand on 07/09/2018 21:38:21

[JasonBModerator @jasonb]

Just in case anyone has not seen it the Round Edge files are now listed on ARC's site, just happened to notice it while looking to see what all the machines had been discounted to. Bargains to be had.

[Ian PParticipant @ianp]

Thanks for the tip off Jason, I looked at the files and thought they would be really handy thing to put on my next Arc order. Unfortunately the description does not indicate the size!

Well to be fair it does state the length, but the 'diameter' or file thickness is a mystery. Having just looked again I see the second picture indicates that this file is more like the size of a needle file, with half its length being a handle. Even so knowing the width would be good.

Ian P

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Ian P on 28/09/2018 22:43:41:

… Unfortunately the description does not indicate the size!

Well to be fair it does state the length, but the 'diameter' or file thickness is a mystery. Having just looked again I see the second picture indicates that this file is more like the size of a needle file, with half its length being a handle. Even so knowing the width would be good.

.

I will measure & photograph mine when they arrive, Ian.

MichaelG.

[JasonBModerator @jasonb]

Ian, I thought the same and e-mailed Ketan to ask him to add the size eg width and thickness.

Edited By JasonB on 29/09/2018 06:57:45

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Ian P on 28/09/2018 22:43:41:

… Having just looked again I see the second picture indicates that this file is more like the size of a needle file, with half its length being a handle.

.

Too late to edit my previous post …

Although detailed sizing is not included; it's worth looking at the 'parent' page: **LINK**

https://www.arceurotrade.co.uk/Catalogue/Cutting-Tools/Tome-Feteira-Files/Swiss-Pattern-Needle-Files

… This puts things in perspective.

MichaelG.

[JasonBModerator @jasonb]

Or just look at the title of this thread "Joint Round Edge Needle Files"

[Ketan SwaliParticipant @ketanswali79440]

Hi Guys

Its about 1.12mm thick and about 6.4mm wide. Will update website in due course.

Ketan at ARC.

[Michael GilliganParticipant @michaelgilligan61133]

The two Files arrived safely today [thank you, Ketan]

As promised, here are photos of the cutting edges:

First the Cut 2 is focused:

.

.

Now the Cut 4 is focused:

.

MichaelG.

[Ketan SwaliParticipant @ketanswali79440]

Posted by mechman48 on 01/09/2018 14:18:32:

Ketan



I'd be interested in getting a couple of these + a couple of square edge ones if you were to stock / supply them.

George.

Hi George, MichaelG

The square edge ones are finally in and on our website now:

https://www.arceurotrade.co.uk/Catalogue/Cutting-Tools/Tome-Feteira-Files/Swiss-Pattern-Needle-Files/Joint-Square-Edge-Needle-Files

Ketan at ARC

 

 

Edited By Ketan Swali on 13/12/2018 15:19:27

[JasonBModerator @jasonb]

That's bad timing I gave someone my Xmas wish list the other week and placed an order myself at the weekend, hope I don't have to wait another year for a square one

Wonder if Ketan will put one under the counter for me?

Edited By JasonB on 13/12/2018 15:24:00

[Author]

Posts