Another great youtube channel

[David ColwillParticipant @davidcolwill19261]

[David ColwillParticipant @davidcolwill19261]

I came across this chap the other day. He is definitely one to watch.

https://www.youtube.com/channel/UCn4U3aEr6L2nLe1m_3as6JQ

Enjoy.

Regards.

David

Edited By David Colwill on 20/07/2016 09:26:50

Edited By David Colwill on 20/07/2016 09:27:36

[chris stephensParticipant @chrisstephens63393]

He sure is, I subscribed after watching the first few minutes of his video on repairing Tom Lipton's level. As i have said here before, he is the perfectionists perfectionist with attention to detail way off the charts. An example for many of us to aspire to but sadly, I fear, few will equal.

[SteveMParticipant @stevem36008]

Thanks for that heads up David. I started on the 'Custom Calipers' video and was hooked immediately. Beautiful and original work.

[Speedy Builder5Participant @speedybuilder5]

If you have 6 minute to spare, it made me chuckle – I think it is well related to the Electronic ignorance post.

**LINK**

BobH

[PeteParticipant @pete41194]

I've been watching Robin's channel ever since Tom Lipton mentioned him on his channel David. An extremely talented person who's demonstrating a lot of topics that haven't been covered by others. There is a lot of really decent machining content showing up on Youtube by people who know there subject very well. Stefan Gotteswinter, Clickspring, Tom Lipton, Abom, This Old Tony just to name a few. I'd still have to put Robin right at the top of the one's I know about today. That's just my own opinion and others may think differently.

[BazyleParticipant @bazyle]

One to watch? I had a look at the 'taper boring' one and boring was true. A 30 minute video with 15 seconds of interest around 21 minutes. Obviously I skipped most of it so only wasted 45 seconds but why do these video makers drone on so and film themselves doing things like counting bits of wood.

[Author]

Posts