0-1 M&W micrometer

0-1 M&W micrometer

This topic has 13 replies, 6 voices, and was last updated 28 January 2019 at 12:14 by Tony Pratt 1.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
27 January 2019 at 13:22 #393220
martin perman 1
Participant
@martinperman1
Gentlemen,

I have lost my adjustment spanner for my 0-1, 0-25 micrometers, can these be bought,

Martin P
Advert

27 January 2019 at 13:22 #35390
martin perman 1
Participant
@martinperman1
27 January 2019 at 13:47 #393222
Harry Wilkes
Participant
@harrywilkes58467
Martin I can't say if they can be bought but maybe check out ebay to see there's a very cheap mic going with a sutable spanner.

H
27 January 2019 at 13:50 #393223
KWIL
Participant
@kwil
Make one?
27 January 2019 at 13:52 #393224
martin perman 1
Participant
@martinperman1
Harry,

I've done a search and it appears that I can get one with a new micrometer, for £10.19p 0ff of Amazon.

Martin P
27 January 2019 at 13:53 #393225
martin perman 1
Participant
@martinperman1
Posted by KWIL on 27/01/2019 13:50:38:

Make one?

If I cant find one I will.

Martin P
27 January 2019 at 14:04 #393227
Howard Lewis
Participant
@howardlewis46836
Martin,

I may well have a spare one.

PM me

Howard
27 January 2019 at 15:04 #393232
Tony Pratt 1
Participant
@tonypratt1
Plenty on Ebay.

Tony
27 January 2019 at 15:17 #393234
mechman48
Participant
@mechman48
I may have one or two spare kicking about in the garage/workshop; if you're not desperate for a day or two I'll have a look & pm you if I have.

George
27 January 2019 at 15:42 #393236
mechman48
Participant
@mechman48
Martin ,Just had a quick look in garage & found a couple of spares… pm me with you're address if any would suit & I'll post one to you…

George.
27 January 2019 at 18:19 #393259
martin perman 1
Participant
@martinperman1
Gentlemen,

Thank you, I have PM'd Howard, if he has no joy I will PM Mechman48. Tony I dont have an EBay account and dont want one

Martin P
28 January 2019 at 10:40 #393343
Howard Lewis
Participant
@howardlewis46836
Have just PM'd Martin to say that I have a couple to send him, for 0 – 1"

Howard
28 January 2019 at 10:51 #393346
martin perman 1
Participant
@martinperman1
Posted by Howard Lewis on 28/01/2019 10:40:54:

Have just PM'd Martin to say that I have a couple to send him, for 0 – 1"

Howard

And I have just replied to his PM, thank you Howard and thank you all for your offers.

Martin P
28 January 2019 at 12:14 #393363
Tony Pratt 1
Participant
@tonypratt1
Posted by martin perman on 27/01/2019 18:19:19:

Gentlemen,

Thank you, I have PM'd Howard, if he has no joy I will PM Mechman48. Tony I dont have an EBay account and dont want one

Martin P

Fair enough but it's a great source for everything & anything.

Tony
Author

Posts

Viewing 14 posts - 1 through 14 (of 14 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Searching for “The Pennsylvania A3 Switcher” by Kozo Hiraoka
  Started by: timdotd in: Books
- 7
- 8
- 8 November 2026 at 22:51
  Grindstone Cowboy
- Pendulum Rod Weight Tray
  Started by: John Purdy in: Clocks and Scientific Instruments
- 2
- 2
- 8 November 2026 at 22:27
  John Haine
- Richard Simmonds’ “How To Make A Weight Driven Clock”
  Started by: iacooper in: Clocks and Scientific Instruments
- 11
- 24
- 8 November 2026 at 21:57
  duncan webster 1
- Physcad
  Started by: Ron Colvin in: CAD – Technical drawing & design
- 11
- 24
- 8 November 2026 at 21:26
  Fulmen
- The NCSC warns that …
  Started by: Michael Gilligan in: The Tea Room
- 7
- 8
- 8 November 2026 at 19:43
  Bazyle
- Stepper Motor for Leadscrew
  Started by: James A in: Workshop Tools and Tooling
- 12
- 23
- 8 November 2026 at 19:18
  Bazyle
- New Mystery Lathe
  Started by: mart7mcfl7 in: Manual machine tools
- 7
- 19
- 8 November 2026 at 18:05
  JasonB
- 3d Printed Carriage Stop for Warco WM180
  Started by: James A in: Workshop Tools and Tooling
- 12
- 17
- 8 November 2026 at 18:05
  Grindstone Cowboy
- Mitutoyo Dial Calliper dial?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 4
- 8
- 8 November 2026 at 17:42
  Martin Johnson 1
- Lubricating a high helix worm in a Mercer indicator
  Started by: Mark Davison 1 in: Clocks and Scientific Instruments
- 7
- 8
- 8 November 2026 at 17:15
  Bo’sun
- 2inch Fowler plans
  Started by: bob53page in: Traction engines
- 7
- 18
- 8 November 2026 at 12:18
  noel shelley
- New Guy
  Started by: mart7mcfl7 in: Introduce Yourself – New members start here!
- 3
- 3
- 8 November 2026 at 11:24
  Howard Lewis
- My week this week! My workshop videos 1 2 … 13 14
  Started by: Phil Whitley in: The Tea Room
- 16
- 338
- 7 November 2026 at 15:52
  Phil Whitley
- * machiens listed on Ebay at silly start prices to clear due to house sale
  Started by: frippy in: Workshop Tools and Tooling
- 2
- 2
- 7 November 2026 at 11:31
  Michael Gilligan
- Micrometer ratchets
  Started by: Graeme Seed in: Workshop Tools and Tooling
- 13
- 21
- 7 November 2026 at 11:06
  Andrew Crow
- SolidCraft Features.
  Started by: blowlamp in: CAD – Technical drawing & design
- 5
- 10
- 7 November 2026 at 10:44
  blowlamp
- WAR FINISH
  Started by: Speedy Builder5 in: The Tea Room
- 14
- 16
- 7 November 2026 at 09:52
  noel shelley
- Stronger Filament 1 2
  Started by: BOB BLACKSHAW 1 in: 3D Printers and 3D Printing
- 13
- 43
- 7 November 2026 at 07:30
  BOB BLACKSHAW 1
- Inserts type for old milling cutter
  Started by: Sonic Escape in: General Questions
- 7
- 10
- 6 November 2026 at 19:06
  Phil Cox
- Mitotoyo dial caliper battery or innards.
  Started by: Clive Farrar in: General Questions
- 12
- 15
- 6 November 2026 at 18:12
  bernard towers
- Unusual dual speed pulley on motor
  Started by: gerry madden in: Manual machine tools
- 10
- 20
- 6 November 2026 at 17:31
  Macolm
- Most used ‘rubbish’ tool
  Started by: jaCK Hobson in: The Tea Room
- 10
- 16
- 6 November 2026 at 17:08
  Neil Wyatt
- Shape of Boxford fixed steady blocks
  Started by: Grindstone Cowboy in: Beginners questions
- 7
- 10
- 6 November 2026 at 16:27
  old mart
- Blank posts in forum
  Started by: Mark Rand in: New Forum Software questions, comments and Test Threads
- 7
- 8
- 6 November 2026 at 09:51
  JasonB
- Onshape Learning
  Started by: BOB BLACKSHAW 1 in: CAD – Technical drawing & design
- 6
- 14
- 6 November 2026 at 09:17
  BOB BLACKSHAW 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

November 2026

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies