Beginners questions

Beginners questions

This forum has 7,317 topics, 113,223 replies, and was last updated 28 July 2026 at 21:15 by Julie Ann.

Viewing 25 topics - 2,651 through 2,675 (of 7,317 total)

← 1 2 3 … 106 107 108 … 291 292 293 →

- Topic
- Voices
- Posts
- Last Post
- Surface finish
  Started by: Adrian Harrison
- 10
- 22
- 4 January 2019 at 05:11
  Adrian Harrison
- Fly press resources
  Started by: Peter Mills 3
- 8
- 13
- 3 January 2019 at 22:37
  Bazyle
- Aluminium Polishing
  Started by: Craig Booth 1
- 6
- 7
- 3 January 2019 at 10:38
  Chris Trice
- An electric motor actuated vice 1 2
  Started by: Robin Graham
- 13
- 31
- 3 January 2019 at 04:08
  Hopper
- Stuart S50
  Started by: Mike Bondarczuk
- 7
- 10
- 1 January 2019 at 17:11
  Michael Edwards 1
- Drill Press Buying Advice 1 2
  Started by: David Cambridge
- 22
- 31
- 1 January 2019 at 16:41
  Jeff Dayman
- Machining small diameter, high l/d ratio parts “one shot”
  Started by: Ross Lloyd 1
- 8
- 10
- 31 December 2018 at 12:12
  Chris Trice
- Min lathe steady rest for up to 65mm diameter
  Started by: andrew lyner
- 12
- 17
- 28 December 2018 at 10:30
  Paul Lousick
- Vice design question
  Started by: Robin Graham
- 8
- 15
- 27 December 2018 at 00:40
  Robin Graham
- A question about lock (jam) nuts 1 2
  Started by: Robin Graham
- 18
- 27
- 26 December 2018 at 21:28
  Dod Mole
- Involute cutters
  Started by: Garry Coles
- 5
- 7
- 25 December 2018 at 14:24
  Zan
- Holding work on the cross slide
  Started by: Robin Graham
- 17
- 24
- 24 December 2018 at 23:01
  Clive Foster
- Best way to turn long, thin brass job 1 2
  Started by: c wastell
- 16
- 31
- 24 December 2018 at 20:38
  CHARLES lipscombe
- New lathe
  Started by: John Kingston
- 1
- 1
- 24 December 2018 at 13:09
  John Kingston
- Milling on the ML7
  Started by: Former Member
- 12
- 19
- 23 December 2018 at 22:53
  Howard Lewis
- Help please
  Started by: NOEL THOMAS
- 6
- 12
- 22 December 2018 at 17:42
  NOEL THOMAS
- Myford Paint
  Started by: Bob Johnstone
- 7
- 10
- 20 December 2018 at 23:12
  Andrew Davies 4
- Milling/drilling spindle 1 2
  Started by: Steve Crow
- 16
- 30
- 20 December 2018 at 10:22
  John Wright 19
- which parting tool
  Started by: Martin Newbold
- 8
- 9
- 19 December 2018 at 14:54
  Howard Lewis
- Ever seen this “Drill Pad” as described by Workshop Practice Series?
  Started by: Ross Lloyd 1
- 14
- 17
- 18 December 2018 at 23:19
  Michael Gilligan
- What MIG Welder should I get?
  Started by: Iain Downs
- 14
- 16
- 18 December 2018 at 14:13
  Pete White
- WM 240 cross slide
  Started by: chris matthews
- 13
- 24
- 18 December 2018 at 10:20
  NOEL THOMAS
- Motor for small loco
  Started by: Pete White
- 5
- 8
- 16 December 2018 at 19:53
  Bazyle
- Colbalt Lathe tools
  Started by: Dalboy
- 9
- 17
- 16 December 2018 at 14:08
  clogs
- How far to be off tool centre before a turned finish becomes poor? 1 2
  Started by: Ross Lloyd 1
- 23
- 29
- 15 December 2018 at 21:33
  Philip Powell

Viewing 25 topics - 2,651 through 2,675 (of 7,317 total)

← 1 2 3 … 106 107 108 … 291 292 293 →

You must be logged in to create new topics.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up