Sorting brasses and bronzes etc.

Sorting brasses and bronzes etc.

This topic has 1 reply, 1 voice, and was last updated 11 February 2012 at 19:46 by Colin G.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
11 February 2012 at 19:46 #29453
Colin G
Participant
@coling
Advert

11 February 2012 at 19:46 #84459
Colin G
Participant
@coling
Ignore : my learner curve !!

Edited By Colin G on 11/02/2012 19:58:45
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- “Your Sketch Is Not Closed,” says Alibre Atom, “So tough!”HERE?ERE?
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 9
- 23
- 29 July 2025 at 22:59
  blowlamp
- milling chuck
  Started by: moonman in: Workshop Tools and Tooling
- 10
- 18
- 29 July 2025 at 22:44
  bernard towers
- smokeless cutting oil 1 2
  Started by: Chris12 in: General Questions
- 16
- 28
- 29 July 2025 at 22:32
  Mark Easingwood
- A lot of al/alloy, new engine, just finished
  Started by: half whit in: Work In Progress and completed items
- 4
- 4
- 29 July 2025 at 22:25
  Mark Easingwood
- New member (a young’un)
  Started by: tomread12 in: Introduce Yourself – New members start here!
- 5
- 5
- 29 July 2025 at 22:23
  Mark Easingwood
- Another Mystery Tool!
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 8
- 9
- 29 July 2025 at 21:29
  not done it yet
- Recommended storage for heavy lathe tooling
  Started by: choochoo_baloo in: Help and Assistance! (Offered or Wanted)
- 4
- 4
- 29 July 2025 at 21:23
  Nigel Graham 2
- Boiler Design – issue 4765 1 2 … 9 10
  Started by: Charles Lamont in: Model Engineer & Workshop
- 28
- 233
- 29 July 2025 at 20:57
  Phill Spowart
- A little bit on the side
  Started by: JasonB in: Work In Progress and completed items
- 3
- 6
- 29 July 2025 at 20:32
  JasonB
- My experiences with an ELS lathe
  Started by: David Senior in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 19
- 29 July 2025 at 19:42
  David Senior
- Gib adjustment on SX2 P mill
  Started by: John Gray 7 in: Workshop Techniques
- 3
- 7
- 29 July 2025 at 19:38
  John Gray 7
- Thread restorers
  Started by: old fool in: The Tea Room
- 8
- 9
- 29 July 2025 at 19:14
  Fulmen
- Amadeal lathes – Any good?? 1 2
  Started by: Tim Sallows in: Workshop Tools and Tooling
- 21
- 42
- 29 July 2025 at 17:53
  SillyOldDuffer
- Unusual Crow Bar Type Tool? Fire Brigade?
  Started by: Martin King 2 in: Help and Assistance! (Offered or Wanted)
- 16
- 22
- 29 July 2025 at 17:30
  Martin King 2
- Isle of Man hobby engineer!
  Started by: Mark Noel in: Introduce Yourself – New members start here!
- 4
- 5
- 29 July 2025 at 16:14
  Mark Noel
- Trilever lathe
  Started by: Stewart Mills in: General Questions
- 10
- 12
- 29 July 2025 at 15:07
  Stewart Mills
- Record 74 auto vice 1 2
  Started by: Danni Burns in: Workshop Tools and Tooling
- 11
- 26
- 29 July 2025 at 14:50
  Danni Burns
- Starting up again if I can find a plan
  Started by: doitagain in: Introduce Yourself – New members start here!
- 4
- 7
- 29 July 2025 at 13:43
  JasonB
- How to balance a cup grinding wheel
  Started by: Clive B in: Workshop Tools and Tooling
- 9
- 14
- 29 July 2025 at 13:10
  noel shelley
- Hofmann Rollers
  Started by: Martin Kyte in: General Questions
- 12
- 20
- 29 July 2025 at 13:02
  Michael Gilligan
- Adcock And Shipley vertical milling head – worth anything?
  Started by: ell81 in: General Questions
- 4
- 5
- 29 July 2025 at 12:18
  Nigel McBurney 1
- Plain bearing speeds
  Started by: zytoooh in: General Questions
- 14
- 19
- 29 July 2025 at 11:08
  Howard Lewis
- Bridgeport ways and wear
  Started by: inline in: Manual machine tools
- 10
- 21
- 29 July 2025 at 08:25
  larry phelan 1
- 2 New Atom ??s: Changing Parts and Lost Planes,
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 3
- 4
- 28 July 2025 at 21:06
  Nigel Graham 2
- Clock gear cutting needed or advice in setting up from scratch.
  Started by: mccormackclockrepairs in: Introduce Yourself – New members start here!
- 10
- 17
- 28 July 2025 at 08:17
  Roger Hart

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies