Bridgeport Machine Servo Motors Anilam Crusader to Mach3

Bridgeport Machine Servo Motors Anilam Crusader to Mach3

This topic has 1 reply, 1 voice, and was last updated 3 January 2015 at 11:55 by Peter Bell.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
3 January 2015 at 11:55 #174577
Peter Bell
Participant
@peterbell11509
Hi,

Just wondered if anyone has experience of converting a 1980 Bridgeport manual & CNC Milling Machine fitted with Servo Motors and Anilam Crusader to Mach3.

Got a feeling it had been mentioned previously but cannot find it?

Peter
Advert

3 January 2015 at 11:55 #15064
Peter Bell
Participant
@peterbell11509
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Tool post drill?
  Started by: Andrew Tinsley in: Workshop Tools and Tooling
- 12
- 17
- 12 June 2025 at 09:40
  Charles Lamont
- A modern mystery (Yanmar injectors)
  Started by: Fulmen in: The Tea Room
- 7
- 19
- 12 June 2025 at 09:00
  Fulmen
- New Warco D330 – Some Advice Please
  Started by: Mark Slatter in: Manual machine tools
- 14
- 21
- 12 June 2025 at 08:21
  Mark Slatter
- DIY steel hardening
  Started by: Bevel in: Materials
- 11
- 18
- 12 June 2025 at 07:45
  Bevel
- Need help choosing a lathe chuck 1 2
  Started by: th1980 in: Workshop Tools and Tooling
- 20
- 30
- 12 June 2025 at 07:02
  JasonB
- Mystery Object Quiz
  Started by: Robert Atkinson 2 in: The Tea Room
- 9
- 16
- 12 June 2025 at 06:41
  Diogenes
- What Did You Do Today 2025 1 2 … 5 6
  Started by: JasonB in: The Tea Room
- 30
- 136
- 12 June 2025 at 06:19
  Diogenes
- Sieg C1 lathe autofeed and screw cutting
  Started by: Rob Athome in: Beginners questions
- 13
- 25
- 12 June 2025 at 00:16
  th1980
- 30w low voltage PWM controller 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 8
- 49
- 11 June 2025 at 23:56
  IanT
- Which motor ?
  Started by: here again in: Manual machine tools
- 8
- 24
- 11 June 2025 at 23:51
  Bazyle
- Searching for leak proof quarter turn water shut off valves
  Started by: Greensands in: Hints And Tips for model engineers
- 4
- 7
- 11 June 2025 at 23:44
  Nigel Graham 2
- Hints and tips
  Started by: larry phelan 1 in: Hints And Tips for model engineers
- 4
- 4
- 11 June 2025 at 23:33
  Nigel Graham 2
- Hydraulic hand pump – air release? What are these screws?
  Started by: ell81 in: Beginners questions
- 5
- 7
- 11 June 2025 at 22:38
  not done it yet
- Myford service engineer
  Started by: Nic Bertelsen in: General Questions
- 8
- 15
- 11 June 2025 at 22:08
  old mart
- crompton motor and dewhurst switch problems
  Started by: mike smith 5 in: Beginners questions
- 6
- 7
- 11 June 2025 at 21:17
  noel shelley
- Is Evo-stik impact adhesive good for wood to plastic? Is bond long lasting? 1 2
  Started by: Simon Robinson 4 in: The Tea Room
- 15
- 28
- 11 June 2025 at 19:44
  Colin Bishop
- Drilling Holes In Aluminium Tube
  Started by: Peter Goodchild in: General Questions
- 9
- 12
- 11 June 2025 at 19:15
  Peter Goodchild
- Any good used lathes contacts in Norfolk
  Started by: messy457 in: Introduce Yourself – New members start here!
- 7
- 11
- 11 June 2025 at 18:40
  Richard Bartholomew 3
- Selling Small Cutters?
  Started by: Vic in: The Tea Room
- 3
- 3
- 11 June 2025 at 16:26
  Michael Gilligan
- Boxford Cud or ML7 1 2
  Started by: Trevor Howley in: General Questions
- 22
- 44
- 11 June 2025 at 15:21
  Howard Lewis
- New Member from Edinburgh | Interested in Learning More
  Started by: williamadam1 in: Introduce Yourself – New members start here!
- 5
- 5
- 11 June 2025 at 15:08
  Howard Lewis
- Model dynamo drawings
  Started by: Dougie Swan in: General Questions
- 7
- 20
- 11 June 2025 at 13:46
  Scrumpy
- Building Bernard Tekippe’s Precision Regulator 1 2 … 5 6
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 14
- 138
- 11 June 2025 at 12:39
  John Haine
- Adaptation of the Proxxon Milling machine 1 2 3
  Started by: Graham Meek in: Manual machine tools
- 13
- 67
- 11 June 2025 at 12:33
  Graham Meek
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 116
- 11 June 2025 at 12:21
  Graham Meek

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

June 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies