Materials

Materials

This forum has 1,009 topics, 13,397 replies, and was last updated 20 July 2025 at 16:46 by Michael Callaghan.

Viewing 25 topics - 26 through 50 (of 1,009 total)

← 1 2 3 … 39 40 41 →

- Topic
- Voices
- Posts
- Last Post
- Polycraft Polyfoam Rigid 145
  Started by: Michael Gilligan
- 2
- 3
- 16 January 2025 at 23:20
  Michael Gilligan
- leaded mild steel.
  Started by: mark smith 20
- 13
- 21
- 16 January 2025 at 15:53
  Nigel Graham 2
- Bronze round tube
  Started by: jefferybond
- 4
- 4
- 14 January 2025 at 16:29
  old mart
- Spring material advice needed
  Started by: old mart
- 13
- 23
- 10 January 2025 at 22:08
  Bill Phinn
- PB102, Colphos 90 or other?
  Started by: Robert Smith 24
- 6
- 12
- 2 December 2024 at 10:27
  Robert Smith 24
- EN8M FLAT
  Started by: Dougie Swan
- 5
- 8
- 27 November 2024 at 10:48
  Roger B
- Bronze
  Started by: Garry Coles
- 6
- 6
- 24 November 2024 at 12:25
  Mick Bailey
- Ultracut 370 alternatives
  Started by: Mick Bailey
- 5
- 6
- 18 November 2024 at 17:53
  mark costello 1
- Hot rolled angle problems 1 2
  Started by: Mick Bailey
- 17
- 42
- 18 November 2024 at 14:44
  duncan webster 1
- Machining 1050 Grade Aluminium
  Started by: Steve Withnell
- 8
- 11
- 14 November 2024 at 11:04
  Paul Lousick
- Unsuitable metals
  Started by: Dalboy
- 11
- 13
- 13 November 2024 at 20:16
  JasonB
- Water tank
  Started by: Speedy Builder5
- 7
- 11
- 12 November 2024 at 20:55
  Speedy Builder5
- Verifying A Metal (Gilding Metal?) 1 2
  Started by: Nigel Graham 2
- 10
- 31
- 12 November 2024 at 17:48
  Nigel Graham 2
- M3x0.36 (fine) thread screws
  Started by: Gareth Jones 9
- 4
- 4
- 12 November 2024 at 15:30
  DC31k
- Alternative to Bronze?
  Started by: Vic
- 11
- 14
- 8 November 2024 at 11:01
  peak4
- Wiper blade springs ?
  Started by: Rich2502
- 6
- 11
- 25 October 2024 at 18:21
  duncan webster 1
- High carbon steel – 8mm flat bar (8mmx40x50)
  Started by: Danni Burns
- 2
- 3
- 23 October 2024 at 12:01
  Danni Burns
- More on Magnets
  Started by: JasonB
- 6
- 6
- 12 October 2024 at 16:53
  Harry Wilkes
- Hydraulic ram for IC engine cylinder
  Started by: Mick Bailey
- 7
- 9
- 1 October 2024 at 06:30
  Diogenes
- How to reduce head diameter of countersunk wood screw? 1 2
  Started by: Clive Foster
- 21
- 43
- 29 September 2024 at 11:07
  Michael Gilligan
- Solvent for removing Hylomar Hylotyte Red compound
  Started by: Greensands
- 8
- 9
- 26 September 2024 at 14:33
  Greensands
- Best grade of stainless steel for knurling in a hobbyist lathe?
  Started by: Mike Davies 3
- 14
- 21
- 23 September 2024 at 23:10
  Mick Bailey
- Imperial Sizes
  Started by: martian
- 2
- 4
- 14 September 2024 at 16:58
  JasonB
- Zinc sheet?
  Started by: MikeK
- 7
- 19
- 7 September 2024 at 01:38
  MikeK
- Minimum recommended silver % for boiler build
  Started by: Blue Heeler
- 2
- 3
- 6 September 2024 at 07:13
  Blue Heeler

Viewing 25 topics - 26 through 50 (of 1,009 total)

← 1 2 3 … 39 40 41 →

You must be logged in to create new topics.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up