Help and Assistance! (Offered or Wanted)

Help and Assistance! (Offered or Wanted)

This forum has 2,145 topics, 27,372 replies, and was last updated 17 September 2026 at 18:19 by Howard Lewis.

Viewing 25 topics - 1,301 through 1,325 (of 2,145 total)

← 1 2 3 … 52 53 54 … 84 85 86 →

- Topic
- Voices
- Posts
- Last Post
- Mystery French Medical ? Item
  Started by: Martin King 2
- 9
- 23
- 11 August 2018 at 18:17
  Fowlers Fury
- using the Worden
  Started by: Deric
- 6
- 9
- 8 August 2018 at 21:41
  Deric
- Fly Press Struggles
  Started by: Richard Harris 5
- 7
- 14
- 7 August 2018 at 13:54
  Richard Harris 5
- Pultra dividing head
  Started by: Ken Weeks
- 2
- 3
- 6 August 2018 at 17:20
  Matt Harrington
- Lead screw nut material
  Started by: Paul Barter
- 6
- 9
- 6 August 2018 at 16:09
  Ron Fowler
- A Replacement circuit board
  Started by: Gary Wooding
- 10
- 15
- 5 August 2018 at 14:16
  Michael Gilligan
- Arbor Press Question 1 2
  Started by: Richard Harris 5
- 15
- 49
- 3 August 2018 at 08:36
  Richard Harris 5
- Inverter problem
  Started by: BOB BLACKSHAW 1
- 12
- 20
- 31 July 2018 at 11:44
  BOB BLACKSHAW 1
- Digital RPM Display Problem
  Started by: Old Crock
- 7
- 12
- 30 July 2018 at 21:55
  Tim Stevens
- Using Tig for Stellite hard facing
  Started by: Windy
- 1
- 3
- 28 July 2018 at 14:28
  Windy
- Dorset Steam Fair 2018
  Started by: steamdave
- 3
- 4
- 23 July 2018 at 17:00
  JohnF
- X2 Mini Mill – Motor Armature
  Started by: Keith Wood 1
- 5
- 8
- 18 July 2018 at 17:27
  Dave Shield 1
- Warco Mini lathe
  Started by: Jack Tapper
- 12
- 18
- 17 July 2018 at 17:46
  Mick B1
- DEWHURST TYPE A FORWARD AND REVERSE CONTROLLER
  Started by: RASCAL123
- 4
- 5
- 13 July 2018 at 20:07
  NJH
- Warco VMC mill wiring help needed!
  Started by: John Hinkley
- 2
- 5
- 12 July 2018 at 14:02
  John Rudd
- Arc welder cooling oil.
  Started by: Jonathan Milner
- 13
- 23
- 8 July 2018 at 19:08
  Brian Wood
- half nuts
  Started by: Trevor Beamond
- 6
- 13
- 8 July 2018 at 16:46
  Michael Gilligan
- Laser/plasma cutting service
  Started by: John Hinkley
- 6
- 12
- 6 July 2018 at 17:54
  John Hinkley
- Bevel gear calculations
  Started by: Baldric
- 4
- 10
- 3 July 2018 at 11:20
  Norman Rogers
- Early .Myford ML7 Lathe
  Started by: Dave Gilmour
- 2
- 3
- 3 July 2018 at 07:26
  Michael Gilligan
- Silver soldering problem
  Started by: BOB BLACKSHAW 1
- 5
- 7
- 2 July 2018 at 16:18
  Bob Stevenson
- Emco Compact 5 headstock taper problem
  Started by: Nick anon
- 7
- 11
- 30 June 2018 at 23:18
  Roderick Mellott
- Rotary table set up
  Started by: BOB BLACKSHAW 1
- 7
- 8
- 27 June 2018 at 23:45
  Jim Nic
- Mr Graham A.
  Started by: Tug Wilson
- 2
- 3
- 27 June 2018 at 20:48
  JasonB
- flywheel cut out spacing
  Started by: bricky
- 3
- 5
- 26 June 2018 at 17:38
  bricky

Viewing 25 topics - 1,301 through 1,325 (of 2,145 total)

← 1 2 3 … 52 53 54 … 84 85 86 →

You must be logged in to create new topics.

Latest Issue

October 2026

Buy Latest/Back Issues

Newsletter Sign-up