Beginners questions

Beginners questions

This forum has 7,317 topics, 113,235 replies, and was last updated 31 July 2026 at 13:32 by Trevor Drabble 1.

Viewing 25 topics - 4,251 through 4,275 (of 7,317 total)

← 1 2 3 … 170 171 172 … 291 292 293 →

- Topic
- Voices
- Posts
- Last Post
- Mill suitability and movement
  Started by: Keith Matheson
- 7
- 9
- 15 November 2015 at 10:44
  Ian S C
- Locomotion No. 1 – where to start ?
  Started by: Phil Catchesides
- 7
- 12
- 13 November 2015 at 23:07
  KWIL
- What sort of RPM for drilling small holes into plastic? (e.g. HIPS & PE) 1 2
  Started by: John Smith 47
- 9
- 29
- 13 November 2015 at 15:07
  John Smith 47
- What is the strongest way to bond styrene onto ABS? 1 2
  Started by: John Smith 47
- 11
- 36
- 12 November 2015 at 15:31
  John Smith 47
- drummond round bed screw cutting question
  Started by: keith wedgwood
- 3
- 8
- 11 November 2015 at 23:22
  keith wedgwood
- What mm (0.3 or 0.5mm) and what grade of pencil lead (HB, B, 2B etc)? 1 2
  Started by: John Smith 47
- 18
- 31
- 11 November 2015 at 22:22
  Bodgit Fixit and Run
- How do I tell if my plastic sheet is HIPS/polystyrene or ABS? And does it matter?
  Started by: John Smith 47
- 2
- 4
- 11 November 2015 at 19:19
  John Smith 47
- Where do I buy 4″ diameter copper the for locomotive boiler making?
  Started by: Simon Robinson 4
- 2
- 3
- 11 November 2015 at 17:23
  AndyP
- Tee-slotted cross-slide query 1 2
  Started by: John Hinkley
- 18
- 40
- 11 November 2015 at 16:30
  John Hinkley
- SC3 chuck out of balance
  Started by: Colin Osborne
- 8
- 15
- 10 November 2015 at 20:04
  John Haine
- New member
  Started by: John Milligan
- 4
- 12
- 10 November 2015 at 10:08
  ega
- How can I make my cutting mat have more friction? (cutting styrene sheet)
  Started by: John Smith 47
- 6
- 10
- 10 November 2015 at 09:01
  Martin Kyte
- D-ream in mild steel
  Started by: nigel jones 5
- 3
- 4
- 8 November 2015 at 10:19
  David Colwill
- Tapered gibs
  Started by: Robin Graham
- 2
- 4
- 7 November 2015 at 21:18
  Robin Graham
- Another worm gear question
  Started by: pgk pgk
- 6
- 12
- 7 November 2015 at 10:36
  Neil Wyatt
- Mounting drive-pulley bracket
  Started by: Oldpedagog
- 4
- 10
- 6 November 2015 at 22:57
  Oldpedagog
- What did I do wrong (Part 2)
  Started by: Roger Hulett
- 10
- 19
- 6 November 2015 at 13:56
  Martin Kyte
- What am I doing wrong. 1 2
  Started by: Roger Hulett
- 16
- 36
- 5 November 2015 at 22:18
  Howi
- Left Hand Trapezoidal Warco Lathe 1 2
  Started by: Trevorh
- 12
- 28
- 5 November 2015 at 09:33
  Trevorh
- Sourcing replacement carbide tips
  Started by: Rainbows
- 7
- 12
- 4 November 2015 at 13:00
  Nigel Bennett
- Building my own spirit burner. 1 2
  Started by: Brian John
- 14
- 45
- 4 November 2015 at 10:24
  Ian S C
- Too long in descaler?
  Started by: Brian G
- 7
- 13
- 4 November 2015 at 08:55
  Michael Gilligan
- Which mill
  Started by: Hevanscc
- 11
- 21
- 2 November 2015 at 23:11
  Hevanscc
- Sharpening Lathe Tools 1 2
  Started by: David Osborne 1
- 14
- 31
- 2 November 2015 at 20:45
  Roy M
- Problems with chuck
  Started by: Andy Spence 4
- 5
- 7
- 1 November 2015 at 16:43
  NJH

Viewing 25 topics - 4,251 through 4,275 (of 7,317 total)

← 1 2 3 … 170 171 172 … 291 292 293 →

You must be logged in to create new topics.

Latest Issue

August 2026

Buy Latest/Back Issues

Newsletter Sign-up