Beginners questions

Beginners questions

This forum has 7,326 topics, 113,438 replies, and was last updated 1 September 2026 at 22:36 by Robin Graham.

Viewing 25 topics - 2,101 through 2,125 (of 7,326 total)

← 1 2 3 … 84 85 86 … 292 293 294 →

- Topic
- Voices
- Posts
- Last Post
- lathe cutting fluid. 1 2
  Started by: Gareth Johnston
- 30
- 40
- 6 January 2020 at 19:54
  Greensands
- Choice between cheap mini milling machines.
  Started by: andrew lyner
- 14
- 25
- 6 January 2020 at 13:37
  andrew lyner
- Really basic lubrication question?
  Started by: Chris TickTock
- 9
- 16
- 6 January 2020 at 08:38
  not done it yet
- Correct use of slitting saw for deep cut.
  Started by: IRT
- 10
- 13
- 5 January 2020 at 19:04
  IRT
- Strange washers..are they justified?
  Started by: Chris TickTock
- 6
- 9
- 5 January 2020 at 18:13
  Nicholas Farr
- Myford Super 7 screw cutting gears (metric) 1 2 3 4
  Started by: Allan B
- 18
- 88
- 5 January 2020 at 16:35
  Steviegtr
- How to lubricate pulley shafy bearings?
  Started by: Chris TickTock
- 7
- 11
- 5 January 2020 at 10:19
  Neil Wyatt
- Imperial supplies of mild steel
  Started by: Martyn Duncumb
- 7
- 11
- 4 January 2020 at 13:01
  JasonB
- Axminster/Sieg/Clarke lathe – all the same? 1 2
  Started by: Ace Chandler
- 22
- 36
- 3 January 2020 at 19:46
  geoff walker 1
- Ml7 New Owner.
  Started by: paul coombs
- 9
- 18
- 3 January 2020 at 17:34
  Howard Lewis
- Myford super 7B Chuck threads 1 2
  Started by: Steviegtr
- 20
- 37
- 3 January 2020 at 17:00
  Howard Lewis
- Colour matching.
  Started by: Robin Graham
- 10
- 14
- 3 January 2020 at 10:51
  Circlip
- Drilling Equipments
  Started by: jamesthomsan
- 1
- 1
- 3 January 2020 at 09:07
  jamesthomsan
- Tom senior M1 Mill overhaul completed
  Started by: Peter Simpson 1
- 4
- 8
- 2 January 2020 at 19:11
  petro1head
- Making a miniature leaf spring.
  Started by: Robin Graham
- 11
- 20
- 2 January 2020 at 17:32
  JohnF
- Myford super 7B oiling
  Started by: Steviegtr
- 3
- 6
- 1 January 2020 at 22:11
  Steviegtr
- 3mm drill hole too tight for 3mm bar
  Started by: Chris TickTock
- 13
- 18
- 31 December 2019 at 21:31
  Watford
- Water left in boiler
  Started by: Jack Robertson 1
- 4
- 5
- 31 December 2019 at 13:41
  Bazyle
- Harrison Lathes
  Started by: Keith Ball
- 11
- 17
- 30 December 2019 at 10:27
  ega
- Any real risks corrosion etc combining aluminium and steel
  Started by: Chris TickTock
- 13
- 19
- 29 December 2019 at 11:55
  Phil P
- Making a superglue chuck adapter for brass wheel 1 2
  Started by: Chris TickTock
- 17
- 41
- 28 December 2019 at 16:16
  Michael Gilligan
- Machining a 70mm hole in steel 1 2
  Started by: petro1head
- 10
- 27
- 24 December 2019 at 16:44
  petro1head
- Colchester Bantam 1600 3 phase supply
  Started by: Gareth Jones 9
- 16
- 24
- 24 December 2019 at 08:44
  Ric Goodman
- Trying to learn about Clock Gears 1 2
  Started by: Chris TickTock
- 15
- 32
- 23 December 2019 at 14:41
  Neil Wyatt
- Castings, creating a datum before milling
  Started by: Garry Smith 7
- 8
- 19
- 23 December 2019 at 04:26
  John Olsen

Viewing 25 topics - 2,101 through 2,125 (of 7,326 total)

← 1 2 3 … 84 85 86 … 292 293 294 →

You must be logged in to create new topics.

Latest Issue

September 2026

Buy Latest/Back Issues

Newsletter Sign-up