Stationary engines

Stationary engines

This forum has 599 topics, 9,557 replies, and was last updated 27 July 2025 at 13:08 by JasonB.

Viewing 25 topics - 426 through 450 (of 599 total)

← 1 2 3 … 17 18 19 … 22 23 24 →

- Topic
- Voices
- Posts
- Last Post
- Engine is binding for some reason : 7BIM engine by PM Research.
  Started by: Brian John
- 5
- 22
- 12 September 2014 at 18:14
  Brian John
- How accurate is bar stock ? Should you order a larger diameter ?
  Started by: Brian John
- 7
- 9
- 10 September 2014 at 20:54
  nigel jones 5
- Who makes Steam pressure gauges reading up to 20 or 30 PSI ?
  Started by: Brian John
- 6
- 11
- 1 September 2014 at 19:36
  Neil Wyatt
- How do I tell stainless steel from silver steel ?
  Started by: Brian John
- 11
- 16
- 30 August 2014 at 14:18
  JasonB
- Timing
  Started by: Peter Matthews 1
- 1
- 3
- 16 August 2014 at 10:26
  Peter Matthews 1
- What metal is used for valves ?
  Started by: Brian John
- 4
- 7
- 8 August 2014 at 18:04
  JasonB
- Walking beams
  Started by: Maurice Cox 1
- 8
- 14
- 20 June 2014 at 21:35
  Harry Wilkes
- What type of steel to use for the 1/4 inch axles ?
  Started by: Brian John
- 7
- 13
- 15 June 2014 at 12:10
  Ian S C
- Why did my Flywheel Wobble?
  Started by: Steve Withnell
- 12
- 16
- 14 May 2014 at 14:59
  Nigel McBurney 1
- Correct position of displacement lubricator.
  Started by: Brian John
- 5
- 9
- 1 May 2014 at 21:02
  Jens Eirik Skogstad 1
- Problem setting up stationary engine. 1 2
  Started by: Brian John
- 11
- 31
- 29 April 2014 at 23:44
  GaryM
- How much steam oil in the cylinders when running on air ?
  Started by: Brian John
- 5
- 8
- 23 April 2014 at 14:12
  Brian John
- Midwest Steam Vertical Boiler
  Started by: Brian John
- 2
- 6
- 10 April 2014 at 17:47
  Brian John
- Painting Model Steam Engines
  Started by: Brian John
- 2
- 4
- 10 April 2014 at 14:17
  Brian John
- Stuart Beam Engine
  Started by: Oompa Lumpa
- 5
- 10
- 7 March 2014 at 12:10
  Oompa Lumpa
- Vulcan Beam Engine
  Started by: Bob
- 7
- 9
- 13 February 2014 at 01:16
  SteveM
- Vertical Cross Single
  Started by: Stewart Hart
- 4
- 13
- 10 February 2014 at 18:20
  JasonB
- wanted !!
  Started by: Brian Gash
- 8
- 19
- 1 February 2014 at 17:29
  Roderick Jenkins
- Inlet and Oulet Tube sizes
  Started by: joe best
- 7
- 21
- 30 January 2014 at 09:17
  Mr Moo
- Bare essentials
  Started by: MICHAEL WILLIAMS
- 10
- 17
- 14 January 2014 at 20:59
  Sub Mandrel
- To Restore or not to Restore – how far do you go
  Started by: joe best
- 6
- 9
- 14 January 2014 at 16:39
  Sub Mandrel
- Jowett Poppet Valve Engine from Chelston Engineering. Drawings wanted.
  Started by: David Clark 13
- 2
- 4
- 25 November 2013 at 08:56
  David Clark 13
- Flat belt drive
  Started by: Alan Worland 1
- 10
- 13
- 10 November 2013 at 16:57
  Edward Messenger
- Stuart Victoria Build – Photo Album
  Started by: Steve Withnell
- 1
- 2
- 9 November 2013 at 14:39
  Steve Withnell
- piston drop valve mill engine m34 from 1978
  Started by: Achim Grauert
- 4
- 9
- 8 November 2013 at 18:22
  David Clark 13

Viewing 25 topics - 426 through 450 (of 599 total)

← 1 2 3 … 17 18 19 … 22 23 24 →

You must be logged in to create new topics.

Latest Issue

August 2025

Buy Latest/Back Issues

Newsletter Sign-up