The Model Engineer Centennial Editions were first published in 1997. Each issue is themed to a cover a specific subject, and Issue 8 deals with Workshop Techniques.
Contents
Metal Preparation
Foundrywork (Terry Aspin)
Lost Wax Casting (W.Savage)
Pattern Making Terry Aspin
Sheet Metal Development (M.G.A.Ford / Andrew Smith)
Tube Bending (Duplex)
Marking out (W.T.Barker)
Lost Wax Casting (W.Savage)
Pattern Making Terry Aspin
Sheet Metal Development (M.G.A.Ford / Andrew Smith)
Tube Bending (Duplex)
Marking out (W.T.Barker)
Fixing Techniques
Rivetting (Inchometer / J.Dunn)
Taper Pins (Duplex)
Soft Soldering (J.W.Tomlinson)
Hard Soldering (Exactus)
MIG welding (Gordon Read)
Adhesives (Stan Bray)
Soft Soldering (J.W.Tomlinson)
Hard Soldering (Exactus)
MIG welding (Gordon Read)
Adhesives (Stan Bray)
Finishing Techniques
Lapping (M.Hall / Duplex)
Subscriber Only Contents
Metal Preparation
Polishing (A.R.Turpin / G.H.Shackleford)
Scraping (Duplex / AEU)
Non-Imbedding Abrasives (G.A.Watt)
Hot Lacquering (Micro)
Anodising (L.Camidge)
Blueing (J.Wood)
Photo-Etching (J.Ewins)
Article continues below…
Advert
Enjoy more Model Engineer reading in the monthly magazine.
Click here to subscribe & save.
Enjoy more Model Engineer reading in the monthly magazine.
Click here to subscribe & save.
Miscellaneous Hand Techniques
Files & Filing (Les Oldridge)
Cutting Tool Angles (Ian Bradley)
Cutting Oils (Derwent Mercer)
Tapping (Duplex)
Reaming (Duplex)
Hardening & Tempering (R.F.Willetts / J.Whitton)
Annealing & Normalising (Tubal Cain)
Cutting Tool Angles (Ian Bradley)
Cutting Oils (Derwent Mercer)
Tapping (Duplex)
Reaming (Duplex)
Hardening & Tempering (R.F.Willetts / J.Whitton)
Annealing & Normalising (Tubal Cain)
Miscellaneous Machining Techniques
Screwcutting (George Thomas)
Toolmakers’ Buttons (R.Hutcheson)
Boring Tools (Novices Workshop / George Thomas)
Speeds and Feeds (J.A.Logue / Stan Bray)
Trepanning (Tubal Cain)
Spinning (Turner)
Graduating (Martin Cleeve)
Dividing in the Lathe (L.C.Mason)
Hand Turning Tools (Tubal Cain)
Toolmakers’ Buttons (R.Hutcheson)
Boring Tools (Novices Workshop / George Thomas)
Speeds and Feeds (J.A.Logue / Stan Bray)
Trepanning (Tubal Cain)
Spinning (Turner)
Graduating (Martin Cleeve)
Dividing in the Lathe (L.C.Mason)
Hand Turning Tools (Tubal Cain)
