By continuing to use this site, you agree to our use of cookies. Find out more

For Sale: Slim Jim PC300 Internal Tail Lift

Date added: 30/09/2019 14:49:38

  • Category: Miscellaneous
  • Year: 2013
  • Price: £275.00

This might be of interest for someone with a miniature traction engine or similar. Up to 300Kg lift. Platform is 650mm wide x 900m deep. (size edited if you've read this ad previously) I'm guessing the whole lift weighs about 140Kg itself. The lift was obtained, (as a working and warrantied item), from an ex-hire fleet a couple of years ago with the intention of fitting it to a Transit for a long slow house move. I actually bought a smaller van, and have now completed moving house without getting round to fitting it. It's always been stored in a dry garage, and obviously during it's prior working life was stored inside a van. I transported it vertically in a 2007 Peugeot Expert over to the new house, so I'm sure it could be fitted to a Scudo/Expert/Dispatch, though probably more applicable to a Transit sized van. It looks like it would fit via the side door as well as the rear, but check that yourself. It's installed with six bolts through the floor with spreader plates underneath (Please note, these are not included in the sale). They are a neat internal design, taking up little floor space, and allowing access to the loadspace via the van doors without needing to fold down a tail lift if it's not necessary for that job. The wiring loom is included, along with the fusable link, and the bridging sheet, so it should be ready to install in the van of your choice. I will supply a printed copy of the brochure and instructions. It's currently on ebay where you can see photos of the actual lift, rather than the sales shot, or please email me and I'll send them on directly. Thanks for looking Bill

Please log in to view ad contact details

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Support Our Partners
Warco
ChesterUK
Eccentric July 5 2018
cowbells
TRANSWAVE Converters
Eccentric Engineering
Meridienne oct 2019
Ausee.com.au
emcomachinetools
Allendale Electronics
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest