Last time, we learnt how to set a datum in the X & Y planes using G54. I have had an email about this saying that most readers would find it easier to just set the machine coordinates and the G54 to Zero. This is especially true when the machine does not have homing switches.…
Last month, I was sacked and was without a job. I had to get another job and fast. No money coming in was not an option. I managed to get a job as a stores person in a press shop. What I did not know was that they really wanted a labourer although they already…
This series is intended to give the reader useful information gained from over 35 years experience in industry. It will cover various topics over the coming months and the occasional humorous moment and sometimes, what not to do. Please feel free to comment or complain through Scribe a Line. The first part of this article…
Penny Farthing Tools was started in Salisbury in the early 90s. It was taken over by one of the current partners, Malcolm Pickering in late 2001. Tony Yates, the other partner joined in 2002. Both Malcolm and Tony are time served engineers so they know what they are talking about, in fact they are quite…
Last month, we levelled up the lathe and checked it for truth. I have had an email about this article asking what to do if the lathe turns out of true. The three Myford lathes I have set up have always been true when set up as suggested but in case your lathe needs adjusting,…
Whether you arrive at The Toolbox from the east or the west you will be struck by the peaceful atmosphere of the village of Colyton. The Tool Box is on the bank of the river Coly next to a single span bridge. There are usually a couple of patio chairs outside the shop so your…
