Articles 1 to 20 of 86
This free plan designed by Neil Wyatt first appeared in MEW 239, March 2016. It has been 3D modelled in Alibre Atom3D for us by Alibre.
This article by Chris Farnell first appeared in 'Maker World' magazine. Apologies for the radical header photo! Let's hope it's lead-free solder, eh?
This horizontal milling attachment by J. Neave is designed to overcome the shortcomings of running a milling arbour between centres. The design used two castings but these could be replaced by triangular blocks of suitable material.
This design by Bill Morris is an excellent test of your skill in working to tight tolerances.
John Olsen improves the drive arrangements of this well made benchtop lathe.
The editor went to visit a Model Engineers’ Workshop
This design for an adjustable lathe filing rest appeared in MEW 19, October-November 1993. It made the case that this design by Bob Fletcher allowed things like squares on turned work to be made more quickly and conveniently than by transferring the work to a a milling machine.
If bending metal strip is a vice and hammer job in your workshop, then this metal bender designed by Terry Gould is worth considering. It was described in MEW 18, August/September 1993 which also contained the free plan reproduced here. See also the swivel base which was described in the same issue.
Here is a very useful table of different wire gauge systems.
Featured in MEW 258 and following issues, this ingenious attachment allows both ordinary spur gears and helical gears to be made on a Myford lathe.
Download the Arduino Sketch for Silly Old Duffers's article on a Torsion Dynamometer in MEW 250 /255 using the link below.
Mr C M McEke (a member of Bristol SMEE) provided this novel design for a complete drill sharpening fixture, which was featured in a free plan given away with MEW 17, June/July 1993.
While many users are more than happy with the standard bearings fitted to Myford Super 7 lathes, some critics consider that roller bearings should have been fitted.
This review of different digital calipers was first published in MEW 248.
A useful article from the first issue of Model Engineer's Workshop by 'Bluey' - a pen-name of Stan Bray who was the first editor of MEW.
This little topslide by D. Scroggins uses a novel approach to the dovetail slides. It first appeared in MEW issue 16, April/May 1993, more details can be found in the archive copy of this issue.
You can download the source code for Silly Old Duffer's Arduino Indicator system, featured in MEW 249, here.
A. Longworth describes a method of sharpening the end faces of end mills and slot drill for those who have no access to a tool and cutter grinder. Reprinted from Model Engineers' Workshop number 14.
Many amateur astronomers and some model engineers will be familiar with the friction-drive Crayford focuser used on many telescopes, which is typically far superior to rack and pinion arrangements. They may not be aware that its inventor, John Wall, named it after the Crayford House Astronomical Society, of which he was a member.
In MEW 240, April 2016, Alistair Sinclair revisits an old design by D.H. Downie.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.