Forum sponsored by:

Manual machine tools

Search for: in Thread Title in

Please login to create a new thread

Please note, this topic is pre-moderated and postings will not appear until they have been approved.

Thread	Replies	Views	Latest Post
STICKY: Advice on Choosing A Mini Lathe By Neil Wyatt	5	720	10/09/2018 17:41:17 by JasonB
What Material for a rear tool post By Mark Davison 1	6	443	19/10/2018 00:07:24 by chris stephens
Myford 254S Headstock Oil Seal Replacement By Prof Thomas	0	58	18/10/2018 23:18:55 by Prof Thomas
Myford Super 7 Belt and change gear cover material By Peter Sansom	6	381	18/10/2018 18:32:13 by Robbo
userwl2850 Machining Videos By Roger Williams 2	2	339	17/10/2018 19:43:02 by Roger Williams 2
bridgeport mill table feed wiring diagram with erskin pd/1114/01/b control unit By richard heard	18	3392	17/10/2018 19:28:09 by Neil Henderson 1
Holbrook 10B lathe Reply to information requested By Anthony mooring	4	396	16/10/2018 16:07:22 by Clive Foster
Drill or Mill? Which machine should I buy? By DrDave	17	908	16/10/2018 13:12:46 by Jon
ML10 By James Burrough	5	574	15/10/2018 08:34:23 by James Burrough
Lux mill to VFD By Stuart Winsor	9	513	14/10/2018 22:29:45 by Clive Foster
Replacement bellows needed By Peter G. Shaw	25	1719	14/10/2018 09:42:25 by Peter G. Shaw
Denham junior Manual By Donald Blakley	8	397	13/10/2018 16:46:40 by Neil Wyatt
1-2K Which Mill? By Men Ifr	14	705	13/10/2018 12:21:14 by Men Ifr
Bernardo Mill? By Robert Askew 1	3	374	12/10/2018 17:27:02 by Robert Askew 1
Multiple vee-belt lathe drive How to avoid the belts "fighting" each other By ega	7	427	11/10/2018 22:28:04 by ega
CBN grinding wheel in model engineer workshop? By lfoggy	2	257	10/10/2018 17:04:52 by ega
Colchester Chipmaster Tailstock cleaning By JB	3	304	10/10/2018 15:08:39 by Brian Wood
Bench grinder improvement mod. By Rik Shaw	11	4062	08/10/2018 10:03:49 by Rik Shaw
F J Edwards Folder By sparky mike	4	392	06/10/2018 10:26:35 by sparky mike
GEC Motor Bearings for Lathe Motor By Andy Carlson	28	1400	03/10/2018 23:37:54 by Andy Carlson

1 2 3 4 5 6 Next > Last >>

All Topics | Latest Posts

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Model Engineer

Model Engineers' Workshop

Latest Forum Posts

3 1/2 inch small boilered TICH
19/10/2018 10:23:53
New Mill - Starter Tooling
19/10/2018 10:21:28
Sourcing materials
19/10/2018 10:18:59
JB cutting tools .com
19/10/2018 09:56:44
How would this lathe tool be used?
19/10/2018 09:48:11
Convertor Issues 240V 1 phase to 415V Three Phase
19/10/2018 09:30:19
Stepper Motor Identification
19/10/2018 09:23:29
What Material for a rear tool post
19/10/2018 00:07:24
Myford 254S Headstock Oil Seal Replacement
18/10/2018 23:18:55
Hemingway Hacksaw
18/10/2018 22:48:58
More Latest Posts...
View All Topics

Support Our Partners

Shopping Partners

Subscription Offer

Latest "For Sale" Ads

Stuart triple Expansion Marine engine
by Harry Webster
£785.00
4 Jaw independent chuck
by Richard John
£50.00
Elliott 10M Shaper
by Richard John
£400.00
Locomotives Large and Small Magazines
by Colin G
£2.00
Model Engineers Workshop Magazines
by Colin G
£1.20
More "For Sale" Ads...

Latest "Wanted" Ads

Clarkson Drill Grinding Attachment
by Johnboy25
Price Not Specified
Salisbury castings
by Trevor Crossman 1
Between £1.00 - £2.00
LATHE WANTED-4 to 5 inch range
by john Green
Price Not Specified
MYFORD SUPER 7 CROSSLIDE IMPERIAL FEEDSCREW & NUT
by CHRIS LLOYD 2
Price Not Specified
5C Spin indexer + Tailstock
by Rod Ashton
Price Not Specified
More "Wanted" Ads...

Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues