By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale Jan 24th

A bit more upcycling.

Making a lamp with a difference, from scrap.

All Topics | Latest Posts

Search for:  in Thread Title in  
magpie12/06/2021 14:45:09
avatar
477 forum posts
92 photos

Start with a length of chrome plated brass tube removed from a very expensive free standing bath tap. As the thread title suggests, a scrap one, and set it up on the mill using my little home made indexing unit. I have a Vertex dividing head, but that was too big to use for this job. More to follow. 22712368_1825059721118970_1449712812345406436_o.jpg

magpie12/06/2021 14:47:16
avatar
477 forum posts
92 photos

Next step is to mill some slots in the tube. 22553341_1825061194452156_2577167779378465714_o.jpg

magpie12/06/2021 14:52:31
avatar
477 forum posts
92 photos

Take some scrap 'Perspex'. My mate owns the local scrapyard, and they get some great stuff in there at times.

Mark out and cut some discs to roughly the right size on the bandsaw.22552906_1825061581118784_7801105805431452084_o.jpg

magpie12/06/2021 14:59:08
avatar
477 forum posts
92 photos

Next, do a bit of pressure turning. I held the discs together with double sided tape and wedged them in the lathe using a rotating chuck in the tailstock.22770694_1825061971118745_6556671432606863506_o.jpg

magpie12/06/2021 15:01:46
avatar
477 forum posts
92 photos

Drill the discs for the LEDs and tap out a hole for a fixing screw. 22550556_1825065124451763_8466399254925648497_o.jpg

magpie12/06/2021 15:03:37
avatar
477 forum posts
92 photos

Then fit the LEDs into the discs.22555641_1825065437785065_7180001951381113353_o.jpg

magpie12/06/2021 15:06:42
avatar
477 forum posts
92 photos

Time to cut the base from 3/4" 'Perspex' and cut the holes for LED driver, switches Etc. 22770563_1825062797785329_3251310117460441620_o.jpg

magpie12/06/2021 15:11:04
avatar
477 forum posts
92 photos

22553209_1825064691118473_2360047594932752677_o.jpgWith the base ready it's time to make some bits for the top. 3/4" 'Perspex' and some discs from hard drives. 22712354_1825064297785179_1041913367405548438_o.jpg

magpie12/06/2021 15:16:13
avatar
477 forum posts
92 photos

Put them all together and you have a lamp that can have either white discs or colour changing discs. The base and top are white at all times, only the discs change colour. I would post a Video of the finished item but don't know how.22553327_1825066871118255_6557936237153088466_o.jpg

Pete.12/06/2021 15:24:05
avatar
571 forum posts
86 photos

That looks fantastic, a similar design with the disc on the column slightly further apart would make a great display stand for small items.

Martin King 212/06/2021 16:33:37
831 forum posts
337 photos

Pete,

Fabulous item, well done!

martin

larry phelan 112/06/2021 16:39:06
1050 forum posts
14 photos

That,s the kind of thing I imagen after having a few stiff drinks !cheeky

mechman4812/06/2021 17:21:07
avatar
2923 forum posts
456 photos

Very contemporary lamp, nicely done magpie.

Roger Best12/06/2021 17:44:52
263 forum posts
31 photos

yesangel

Harry Wilkes12/06/2021 21:05:16
avatar
1133 forum posts
64 photos

Just brill

H

Robert Dodds12/06/2021 21:33:34
291 forum posts
40 photos

Like it, A lot.

Bob D

Steviegtr12/06/2021 22:14:26
avatar
2141 forum posts
299 photos

Very nice. Good work.

Steve.

Nicholas Farr12/06/2021 23:30:23
avatar
2864 forum posts
1295 photos

Hi Magpie, very nice and I think it would be a good write- up for the ME mag as something different.

Regards Nick.

Martin W13/06/2021 00:49:00
882 forum posts
29 photos

Great, I think it is brilliant.

Cheers Martin.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
cowells
Eccentric July 5 2018
emcomachinetools
JD Metals
Warco
ChesterUK
walker midge
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest