By continuing to use this site, you agree to our use of cookies. Find out more
Forum sponsored by:
Forum sponsored by Allendale Jan 24th

flywheel construction

All Topics | Latest Posts

Search for:  in Thread Title in  
bricky27/01/2021 13:06:50
479 forum posts
48 photos

I am building 2 flywheels for Brian Rupnows Thumper Rockerblock i/c engine.I have made the hubs and am starting on the 6" rims which are joined to the hubs with veins at an angle to make fans to cool the cylinder.These fan blades are welded in both the hubs and the rims.The rims finish at 3/4" and I ask for advice on how much to leave on the rims in case of distortion after being welded.

JasonB27/01/2021 13:12:29
avatar
Moderator
19967 forum posts
2179 photos
1 articles

I would have thought 1mm on each surface more than enough as the "blades" are not that thick so you will have to go quite lightly with the welding. Don't know how far you are with the hubs but I would leave the bore undersize and then once the whole flywheel is complete turn OD, one side and bore all at one setting then flip over to skim the other side that way everything should run true. If your hubs are already bored then you may want to allow a bit more on the rim but that will depend on how you jig the flywheel for welding.

bricky27/01/2021 19:13:40
479 forum posts
48 photos

Thanks Jason,you have to bore the hub to size as there is a jig to make with a 45 deg, slope to fit a pin of 1/2" so that the slots for the blades can be cut in the hub.I will do as you suggest .The jig for welding will be next after the rims.Thanks again.

Frank

JasonB27/01/2021 19:34:40
avatar
Moderator
19967 forum posts
2179 photos
1 articles

You can still do that, drill it say 3/8" or 10mm for holding on the jig and then once all fabricated it can be opened up to 1/2" at the same setting as finish turning the rim. I'd also suggest boring the 1/2" to fit your crank shaft material rather than reaming.

All Topics | Latest Posts

Please login to post a reply.

Magazine Locator

Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!

Find Model Engineer & Model Engineers' Workshop

Latest Forum Posts
Support Our Partners
JD Metals
emcomachinetools
ChesterUK
Eccentric July 5 2018
cowells
Warco
Eccentric Engineering
Subscription Offer

Latest "For Sale" Ads
Latest "Wanted" Ads
Get In Touch!

Do you want to contact the Model Engineer and Model Engineers' Workshop team?

You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.

Click THIS LINK for full contact details.

For subscription issues please see THIS LINK.

Digital Back Issues

Social Media online

'Like' us on Facebook
Follow us on Facebook

Follow us on Twitter
 Twitter Logo

Pin us on Pinterest