|Ian Parkin||15/09/2020 18:22:14|
833 forum posts
I need to fit a tachometer on a machine in the morning
how do i fit the small button magnet to a shaft?
if i glue it to a mild steel shaft does the steel sap the magnetism ?
18627 forum posts
Araldite worked OK on mine
1362 forum posts
No it will be fine.
|Brian Sweeting||16/09/2020 00:10:24|
|437 forum posts|
Make sure that you stick the magnet the right way around, you just know that it will happen.
|Neil Wyatt||16/09/2020 15:57:27|
18124 forum posts
I found the small neodymium magnets are so strong that popping one in a keyway or spanner notch has always worked for me without adhesive.
1716 forum posts
... which probably makes Brian's admonition even more important
|Ron Laden||17/09/2020 06:59:34|
1985 forum posts
I have fitted one to my mill and one to the lathe ( dry with no adhesive) and neither have budged yet.
Edited By Ron Laden on 17/09/2020 07:07:17
6181 forum posts
My lathe's magnet sits in a slight recess, which I guess gives it more grip on a machined flat surface and stops it sliding on a smooth round shaft.
Sliding may be a problem - although I can't imagine a strong magnet coming off, it might move sideways. Sideways movement may not show up in practice. Provided the magnet's close enough right-left to activate the hall sensor, rpm will still be measured. Even if a magnet gradually walks around the circumference, the effect on rpm readings will be small.
A spot of glue would also stop sideways movement and be less trouble to apply at home Another guess; it's cheaper for the manufacturer to machine a flat recess on a lathe spindle than it is to clean it carefully and apply a glue resistant to oil and heat. Also easier to fix an unglued magnet if untrained labour puts it on upside down.
|Ian Parkin||17/09/2020 16:30:57|
833 forum posts
I did the job today just ground a flat on a 20mm silver steel shaft and placed the magnet and it stays there even at 1000rpm
its been running an hour or so now
I had it in my head that a magnet would have need putting in a non ferrous collar to work adequately
thanks for all the help with this
Please login to post a reply.
Want the latest issue of Model Engineer or Model Engineers' Workshop? Use our magazine locator links to find your nearest stockist!
You can contact us by phone, mail or email about the magazines including becoming a contributor, submitting reader's letters or making queries about articles. You can also get in touch about this website, advertising or other general issues.
Click THIS LINK for full contact details.
For subscription issues please see THIS LINK.